Cvd Axle
TEAM ASSOCIATED AE TC5 build CVD axle (polish ver)
|
|
CVD Axle $13 CVD Axle |
|
|
Axle $3.3 Axle |
|
|
Axle*2PCS $3.3 Axle*2PCS |
|
|
Rear Axle $4 Rear Axle |
|
|
Wheel Axle $3.3 Wheel Axle |
|
|
Solid Axle $8.6 Solid Axle |
|
|
Steering Axle $3.3 Steering Axle |
|
|
Axle Pin 8P $2.7 Axle Pin 8P |
|
|
Wheel Axle 2P $3.5 Wheel Axle 2P |
|
|
Wheel Axle 4P $10.95 Wheel Axle 4P |
|
|
wheel Axle (SET) $5 wheel Axle (SET) |
|
|
Wheel Axle (set) $6 Wheel Axle (set) |
|
|
11261 – Wheel Axle 2pieces $2.5 11261 – Wheel Axle 2pieces |
|
|
11314 Axle screws 8pcs. $1.25 11314 Axle screws 8pcs. |
|
|
Wheel Axle(F/R) 2P $15 Wheel Axle(F/R) 2P |
|
|
11339 Lower front axle 2pcs. $1 11339 Lower front axle 2pcs. |
|
|
11340 Upper front axle 4pcs. $1 11340 Upper front axle 4pcs. |
|
|
11282 Cross piece front axle $1 11282 Cross piece front axle |
|
|
Spare Part MadFire LE/RE: Wheel Axle $3.25 Spare Part MadFire LE/RE: Wheel Axle |
|
|
Eagle 50 Spare Parts: 50H03-26 Rear Axle $4 Eagle 50 Spare Parts: 50H03-26 Rear Axle |
|
|
1/10 Exceed RC Mad Crawler: Solid Axle Set $4.5 1/10 Exceed RC Mad Crawler: Solid Axle Set |
|
|
Colco 4-Channel Apache Spare Parts: Outer Axle Claw $8 Colco 4-Channel Apache Spare Parts: Outer Axle Claw |
|
|
Colco 4-Channel Apache Spare Parts: Swivel Head & Inner Axle $6 Colco 4-Channel Apache Spare Parts: Swivel Head & Inner Axle |
|
|
Colco 4-Channel Apache Spare Parts: Inner Axle Claw $4 Colco 4-Channel Apache Spare Parts: Inner Axle Claw |
|
|
Spare Part Ultra 1/10 Nitro Car (51C22): Axle $3.3 Spare Part Ultra 1/10 Nitro Car (51C22): Axle |
|
|
Spare Part Forza 1/10 Nitro Buggy (51C812, 51C06): Axle*2PCS $3.3 Spare Part Forza 1/10 Nitro Buggy (51C812, 51C06): Axle*2PCS |
|
|
Venom Air Corps Night Ranger 3D OEM Replacement Parts: hm-22e-z-26 Rear Axle $4 Venom Air Corps Night Ranger 3D OEM Replacement Parts: hm-22e-z-26 Rear Axle |
|
|
Smartech Speedy Tiger * SPARE PARTS *: 11448 Susp. Arm Axle 30mm 4pieces $4 Smartech Speedy Tiger * SPARE PARTS *: 11448 Susp. Arm Axle 30mm 4pieces |
|
|
Smartech Speedy Tiger * SPARE PARTS *: 11450 Susp. Arm Axle 35mm 4pieces $1 Smartech Speedy Tiger * SPARE PARTS *: 11450 Susp. Arm Axle 35mm 4pieces |
|
|
Exceed RC 1/8 Nitro Spare Parts for Razor Buggies and Titan Trucks: Axle Pin 8P $2.7 Exceed RC 1/8 Nitro Spare Parts for Razor Buggies and Titan Trucks: Axle Pin 8P |
|
|
AirWolf 3 Channel Infrared Co-axle Indoor Helicopter Ready to Fly!! $79.95 The New 3 Channel Mini Micro Indoor Helicopter can fly easily right out of your hand, with the new technology of infrared remote control that control up to 3 different helicopters. Three channels is better than two channels and with this extra function, you can fly the helicopter left, right, forward, and reverse. Control easily with the new design remote control with built in charger system right out of the remote. Just put in 6 AA batteries( not included) in the 3 channel remote control and turn on the helicopter and your having the most fun you will experiences. Unique 3-channel wide infrared remote control (typical mini helicopters only feature 2-channel controls) – Helicopter features built-in rechargeable lithium battery (recharged by remote controller) – Remote controller powered by 6 x AA batteries (sold separately) – Wireless range: 6 meters radius (manufacturer rated) – Recharge time: ~15-20 minutes – Flight time: ~5 minutes / charge Main Rotor Diameter: 5.25inches (130mm) Length 6.5inches (170mm) excluding rotors. Rear Rotor diameter 1.25inches (30mm) Helicopter weight: Only 10g, including Li-Poly battery Rechargeable Flight Battery: High capacity integral Lithium Polymer battery Charger: Integral Transmitter/Charger supplied with LED indicator/Auto shut off. Simply plug in and charge, with easy to use connections Flight duration: 7 to 10 minutes Charge time: 15-20 minutes for full charge Ready To Run: Supplied completely assembled and ready-to-fly, with pre-installed 3 Channel Proportional Infra Red Control System Range: Up to 100 feet (30 meters). Frequency: Infra Red Control System – Bands A & USB allow up to two models to be flown at the same time Helicopter 3 CH Proportional Control System Extra Tail Blade 3.7V Li-Poly Battery Built in Charger English Manual |
|
|
The New 2009 Air Wolf 4 Channel Co-Axle Ready to Fly Helicopter $299.95 This is the brand new 4 CH AirWolf Twin-Rotor-Coaxial helicopter. This helicopter is one of the newest dual-rotor in the market. The Twin-Rotor-Coaxial-Twin-Rotor design the helicopter has extreme stability in taking off and easily control by any beginner pilots. The AirWolf is a beginner-friendly rc helicopter enjoyed by inexperienced/experienced flyers. Its unique design makes it easy to configure, control, and more fun to fly. It is designed to train pilots and entertain them by delivering a stable flying platform capable of controlled indoor and outdoor flight course . The AirWolf has two sets of main rotors and a freewheeling tail rotor that does not affect flight. The counter-rotating main rotors eliminate the need for tail rotor compensation because they move in opposite directions, canceling each other?s rotational torque . In addition, the blade sets give it an added bit of gyroscopic stability, which allows mere mortals to hover it with prowess. The lower rotor provides cyclic control for the heli. To yaw the helicopter (left and right), one of the main rotors either slows down or speeds up to create an imbalance in torque. This results in the AirWolf turning in the direction opposite to the rotation of the faster moving rotor. Since the AirWolf is fixed pitch, collective control is governed exclusively by throttle. On the AirWolf, the roll cyclic is a bit more responsive than its pitch cyclic (fore/aft control). This is because the very small range of cyclic control can more easily roll the heli than it can pitch it along the length of the body. This attribute actually helps make the AirWolf stable. For a heli of this size, the responsiveness on both axes is appropriate. For beginners, flying the AirWolf out of ground effect (first few inches off the ground) is not difficult either. Unlike other micros, the AirWolf tends to rise evenly rather than skate across the floor laterally. If you punch the throttle, it has no hesitation in climb either. The Li- poly battery will help to achieve better performance and longer flight time. Improved version! This is the 2009 version with a lot of adjustment and improvements 4 Channel remote control set includes complete Forward/Backward, Left/Right, Up/Down control (RUDDER, AILERON, ELEVATOR, AND THROTTLE) New Look Transmitter, New Look Cabin, Improved Mixer/Gyro Control, More Stable Flight, even first timer can control easily Coaxial counter-rotating blades cancel out the rotational torque that makes hovering a conventional helicopter so difficult. Precise controlling and hovering Dual counter rotating rotor which eliminates the need for a tail rotor Rudder is controlled using variation in speed of each level of the rotor blades Reliable high quality mixer with built-in gyro board Pre-positioned servo mounts |
|
|
The New 4 Channel EC-120 EuroCopter Co-Axle Electric Ready to Fly Helicopter $299.95 This is the brand new 4 CH EC-120 Twin-Rotor-Coaxial helicopter. This helicopter is one of the newest dual-rotor in the market. The Twin-Rotor-Coaxial-Twin-Rotor design the helicopter has extreme stability in taking off and easily control by any beginner pilots. The CH EC-120 is a beginner-friendly rc helicopter enjoyed by inexperienced/experienced flyers. Its unique design makes it easy to configure, control, and more fun to fly. It is designed to train pilots and entertain them by delivering a stable flying platform capable of controlled indoor and outdoor flight course . The CH EC-120 has two sets of main rotors and a freewheeling tail rotor that does not affect flight. The counter-rotating main rotors eliminate the need for tail rotor compensation because they move in opposite directions, canceling each other?s rotational torque . In addition, the blade sets give it an added bit of gyroscopic stability, which allows mere mortals to hover it with prowess. The lower rotor provides cyclic control for the heli. To yaw the helicopter (left and right), one of the main rotors either slows down or speeds up to create an imbalance in torque. This results in the CH EC-120 turning in the direction opposite to the rotation of the faster moving rotor. Since the CH EC-120 is fixed pitch, collective control is governed exclusively by throttle. On the CH EC-120, the roll cyclic is a bit more responsive than its pitch cyclic (fore/aft control). This is because the very small range of cyclic control can more easily roll the heli than it can pitch it along the length of the body. This attribute actually helps make the CH EC-120 stable. For a heli of this size, the responsiveness on both axes is appropriate. For beginners, flying theCH EC-120 out of ground effect (first few inches off the ground) is not difficult either. Unlike other micros, the CH EC-120 tends to rise evenly rather than skate across the floor laterally. If you punch the throttle, it has no hesitation in climb either. The Li- poly battery will help to achieve better performance and longer flight time. Improved version! This is the 2009 version with a lot of adjustment and improvements 4 Channel remote control set includes complete Forward/Backward, Left/Right, Up/Down control (RUDDER, AILERON, ELEVATOR, AND THROTTLE) New Look Transmitter, New Look Cabin, Improved Mixer/Gyro Control, More Stable Flight, even first timer can control easily Coaxial counter-rotating blades cancel out the rotational torque that makes hovering a conventional helicopter so difficult. Precise controlling and hovering Dual counter rotating rotor which eliminates the need for a tail rotor Rudder is controlled using variation in speed of each level of the rotor blades Reliable high quality mixer with built-in gyro board Pre-positio |
|
|
Newest 2.4GHz Lama V4 Silver Version Electric Co-Axle 4 Channel Helicopter $299.95 This newest 2.4GHz Lama V4 version of the popular 4 Channel Esky 300 series RC electric helicopters is easier than ever to fly. The coaxial counter-rotating blades cancel out the rotational torque that makes hovering a conventional helicopter so difficult while providing unsurpassed stability in all phases of the flight. Then consider the improved 2.4GHz RC system with brand new 2.4GHz intelligent spread spectrum transmission technology & digital DSK coding technology, coupled with brand new digital servos, which ensure a faster response for more precise control. With this system, several can fly together without the concern and hassle of crystal management. Whether you are a beginner or expert pilot looking for the best in coaxial micro helicopter performance, you’ll enjoy many of the outstanding features that this Lama V4 has to offer. Unlike toy helicopters usually with only two channels, the Lama V4 provides 4 channels for precise realistic control: Throttle for altitude, Roll for side-to-side, Pitch for forward-reverse and Yaw which allows you to rotate the helicopter in any desired direction while hovering or moving. The Esky Lama V4 features a sleek modern body with split fuselage connected by two carbon fiber rods for easy access to the internals and is extremely durable. This Ready-To-Fly Out-Of-The-Box RC electric helicopter includes everything you need to fly and includes a transmitter simulator cable and FMS software for practice on your computer. The pre-installed main motors, 4-in-1 control unit receiver, mixer, ESC, and gyro, the high speed, high performance micro servos, and powerful 800mAh Li-po battery pack, you’ll have extended flight time per charge (10-15 minutes) Quick Specs: Mail Rotor Diameter: 13.5" Length: 18" Height: 7.5" Width: 3.7" Weight: 0.66 lb with battery Power System: 180 motor x 2pcs Radio: 2.4GHz Spread Spectrum w/DSK coding Servos: Digital 7.5g, 1kg-cm, 0.1 s/60deg x 2 pcs The Standard 2.4GHz Lama V4 Package Includes: – Helicopter Body (Silver) with one spare blade set – New 4-channel 2.4GHz USA Mode-2 Transmitter with intelligent spread spectrum transmission technology & digital DSK coding technology, with Trainer Switch, Trainer/FlightSIM Port, SIM cable and AA batteries – Mix controller: 4 in 1 mix controller (Including gyro, mixer, ESC, New 2.4Ghz receiver) – New High Speed Digital servos – 7.4V 800mAh Li-Polymer battery & charger w/AC adapter and 12VDC clips – Quick Start Guide and Manual plus FMS simulator software disk |
|
|
Exceed RC 1/8Th Scale Nitro Gas Power .21 Engine Ready to Run Buggy Gama Orange Limited Edition $579.95 The new generation of 1/8 Buggy are here with much newly added features and functions. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again. This massive 1/8 MadFire Buggy comes with Level .21 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 125cc. The impressiveness of the MadFire can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadFire are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you don’t have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadFire to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadFire will lead the way to new standards for the RC world and conquer all. The 4WD Engine-powered Monster Buggy MadFire will Push your Imagination into overdrive! FX-2 Sport Radio& Engine 21 Level WheelBase:15" Weight:5.2kg Polished 6061 Aluminum Chassis Plates Massive pre-glued 4.75" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub 1-Speed Transmission Heavy Duty Metal Gear Steering Servo 125cc Flip-top Fuel Tank Adjustable Threaded Aluminum Shocks Radio Transmitter: 2 Channel AM 27MHz Aluminum Muffler Powerful .21 Nitro Engine Built-In Innovative Servo Power Saving Concept Aluminum Rear Shocks Aluminum Rear Plate Full Metal Gear Front CVD Drive Shaft Makes Smooth Turns and Prevent Dust Aluminum Muffler Hardeded and Coated Steel Gears Multi-piece rollbar Steel High-Temp Brake Disc Heavy Duty Slipper Clutch 3-Shoe Racing Clutch Length: 17.12 Inches Width: 12.20 Inches Height: 7.48 Inches Gear Ratio: 1:10.9 Full Sealed Ball Bearing Set All Assembled with Radio Control and Ready to Run Over the Competition! |
|
|
1/8Th Scale .21 Engine Nitro Fuel Powered Exceed RC Ready to Run MadFire Gama Green Version $579.95 The new generation of 1/8 Buggy are here with much newly added features and functions. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again. This massive 1/8 MadFire Buggy comes with Level .21 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 125cc. The impressiveness of the MadFire can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadFire are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you don’t have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadFire to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadFire will lead the way to new standards for the RC world and conquer all. The 4WD Engine-powered Monster Buggy MadFire will Push your Imagination into overdrive! FX-2 Sport Radio& Engine 21 Level WheelBase:15" Weight:5.2kg Polished 6061 Aluminum Chassis Plates Massive pre-glued 4.75" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub 1-Speed Transmission Heavy Duty Metal Gear Steering Servo 125cc Flip-top Fuel Tank Adjustable Threaded Aluminum Shocks Radio Transmitter: 2 Channel AM 27MHz Aluminum Muffler Powerful .21 Nitro Engine Built-In Innovative Servo Power Saving Concept Aluminum Rear Shocks Aluminum Rear Plate Full Metal Gear Front CVD Drive Shaft Makes Smooth Turns and Prevent Dust Aluminum Muffler Hardeded and Coated Steel Gears Multi-piece rollbar Steel High-Temp Brake Disc Heavy Duty Slipper Clutch 3-Shoe Racing Clutch Length: 17.12 Inches Width: 12.20 Inches Height: 7.48 Inches Gear Ratio: 1:10.9 Full Sealed Ball Bearing Set All Assembled with Radio Control and Ready to Run Over the Competition! |
|
|
1/8Th Scale Exceed RC GP .21 Engine 4WD Buggy MadFire Buggy Nitro Gas Powered Alpha Blue Version $579.95 The new generation of 1/8 Buggy are here with much newly added features and functions. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again. This massive 1/8 MadFire Buggy comes with Level .21 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 125cc. The impressiveness of the MadFire can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadFire are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you don’t have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadFire to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadFire will lead the way to new standards for the RC world and conquer all. The 4WD Engine-powered Monster Buggy MadFire will Push your Imagination into overdrive! FX-2 Sport Radio& Engine 21 Level WheelBase:15" Weight:5.2kg Polished 6061 Aluminum Chassis Plates Massive pre-glued 4.75" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub 1-Speed Transmission Heavy Duty Metal Gear Steering Servo 125cc Flip-top Fuel Tank Adjustable Threaded Aluminum Shocks Radio Transmitter: 2 Channel AM 27MHz Aluminum Muffler Powerful .21 Nitro Engine Built-In Innovative Servo Power Saving Concept Aluminum Rear Shocks Aluminum Rear Plate Full Metal Gear Front CVD Drive Shaft Makes Smooth Turns and Prevent Dust Aluminum Muffler Hardeded and Coated Steel Gears Multi-piece rollbar Steel High-Temp Brake Disc Heavy Duty Slipper Clutch 3-Shoe Racing Clutch Length: 17.12 Inches Width: 12.20 Inches Height: 7.48 Inches Gear Ratio: 1:10.9 Full Sealed Ball Bearing Set All Assembled with Radio Control and Ready to Run Over the Competition! |
|
|
Super Powerful 450SE All-Aluminum 3D Electric RC Helicopter 90% Assembled Almost-Ready-to-Fly $499.95 New SE 450 Special Edition All Aluminum Mini Size 3D Electric Radio Remote Controlled RC Helicopter ARF w/ Fiber Glass Canopy!! Features ?Main shaft and tail rotor shaft running by direct transmission belt, which reduce the intermediate transmission energy loss. ?Read Axle screw used high-intensity M2.5 screw to meet the high-speed rotating of the blade. ?The up main shaft bearing block and bottom main shaft bearing block adopt integrated structure, which guarantee the main shaft running smoothly. ?The adjustable Aluminum battery mounting plate can meet different size of battery. ?The Read Axle of the blade used 4mm steel shaft to meet the hard 3D flight. ?4mm width transmission belt, reducing the slip possibility of the Tail Rotor Drive Belt. ?Their Cowling made with lighter colored glass fiber. ?Safety and convenience Linkage ball. ?All the aluminum part for this TG-450 from CNC Machinery ?Flip-gyroscope sensor structure ?High-intensity hexagonal screw up to +-14 degree. ?120 degree ECCPN SYSTEM It comes disassemble in the box!! Everything need to be built. Professional installation required. Specifications & Equipment ?Length: 656mm ?Height: 249mm ?Main Rotor Diameter: 714mm(320 Blades) ?Tail Rotor Diameter: 147mm ?Motor Pinion Gear: 12T/13T ?Main Drive Gear: 150T ?Drive Gear Ratio: 1:12,5:4.3(12T) 1:11.51:4.3(13T) ?Weight: 380g ?Flying Weight: 780g-820g Recommended Power and Radio Equipment (NOT included in kit) ?Li-Poly Battery: 11.1v/(1500mAh or more) ?Transmitter: 6 channel or more ( Helicopter System) ?Receiver: 6 channel or more ?Gyro: 1pc ?Servo: 3pcs ?Rudder servo: 1pc ?Brushless Motor: 3200kv-4000kv ?ESC: 11.1v/(25A or more) It comes disassemble in the box!! Everything need to be built. Professional installation required. It comes disassemble in the box!! Everything need to be built. Professional installation required. |
|
|
1601 Shiny Center Drive CVD Kit Revo $44.89 … |
|
|
MIP CVD Axles: 18-T, 18-MT $15.19 18T MIP CVD Axles… |
|
|
C-CVD Axle: LOS 1/18 $4.19 … |