Dee Model Airplane
The First Manned Flight – England 1849
The First Manned Flight – England 1849
Britains history is made up of very famous engineers all through their history. This has made me decide to write about one of the the most famous English Engineers called the “Father of Aviation” Sir George Cayley who flew the first manned flight in Brompton, England in 1849.
Sir George Cayley, 6th Baronet (27 December 1773 – 15 December 1857) was a prolific English Engineer, one of the most important people in the history of aeronautics. Many consider him the first true scientific aerial investigator and first person to understand the underlying principles and forces of flight.
In 1799 he set forth concept of the modern aeroplane as a fixed-wing flying machine with separate systems for lift, propulsion, and control. Often known as “the father of Aerodynamics”, he was a pioneer of aeronautical engineering. Is called the “Father of Aviation” and designer of the first successful glider to carry a human being aloft, he discovered and identified the four aerodynamic forces of flight — weight, lift, drag and thrust — which are in effect on any flight vehicle. Modern aeroplane design is based on those discoveries including cambered wings. He is credited with the first major breakthrough in heavier-than-air flight and he worked over half a century before the development of powered flight. He designed the first actual model of an aeroplane and also diagrammed the elements of vertical flight.
By 1804 Sir George Cayley had built his first model gliders which appeared similar to modern aircraft: a pair of large monoplane wings towards the front, with a smaller tailplane at the back comprising horizontal stabilisers and a vertical wing.
In 1809 Sir George Cayley was quoted as saying, “I feel perfectly confident that we shall be able to transport ourselves and families, and their goods and chattels, more securely by air than by water, and with a velocity of from 20 to 100 miles per hour.”
By 1810 Sir George Cayley had published his now-classic three-part treatise “On Aerial Navigation” which stated that lift, propulsion and control were the three requisite elements to successful flight, apparently the first person to so realize and so state.
By 1816 Sir George Cayley had turned his attention to lighter-than-air machines and designed a streamlined airship with a semi-rigid structure. He also suggested using separate gas bags to limit an airship’s lifting gas loss due to damage. In 1837 Cayley designed a streamlined airship to be powered by a steam engine.
1832 to 1835 Sir George Cayley had served for the whig party as member of parliament for Scarborough, and helped found the Royal Polytechnic Institution (now University of Westminster), serving as its chairman for many years. He was a founding member of the British Association for the Advancement of Science and was a distant cousin of the mathematician Arthur Cayley.
Around 1843 Sir George Cayley was the first to suggest the idea for a convertiplane, an idea which was published in a paper written that same year.
During some point prior to 1849 Sir George Cayley designed and built a biplane powered with “flappers” in which an unknown ten-year-old boy flew.
During 1853 Sir George Cayley with the continued assistance of his grandson George John Cayley and his resident engineer Thomas Vick, he developed a larger scale glider (also probably fitted with “flappers”) which flew across Brompton Dale.
Later during 1853 the first adult aviator has been claimed to be either Cayley’s coachman. One source (Gibbs-Smith) has suggested that it was John Appleby, a Cayley employee — however there is no definitive evidence to fully identify the pilot. The Plane Cayley built was a triplane glider (a glider with three horizontal wing structures) that carried his coachman 900 feet (275 meters) across Brompton Dale in the north of England before crashing. It was the first recorded flight by an adult in an aircraft.
An obscure entry in volume IX of the 8th Encyclopaedia Britannica of 1855 is the most contemporaneous account with any authority regarding the event. A 2007 biography of Cayley (Richard Dee’s The Man Who Discovered Flight: George Cayley and the First Airplane) claims the first pilot was Cayley’s grandson George John Cayley (1826-1878). Dee’s book also reports the re-discovery of a series doodles from Cayley’s school exercise book which suggest that Cayley’s first designs concerning a lift-generating inclined plane may have been made as early as 1793.
A replica of the 1853 machine was flown at the original site in Brompton Dale in 1974 and in the mid 1980s by Derek Piggott. The glider is currently on display at the Yorkshire Air Museum. Another replica flew there in 2003, first piloted by Allan McWhirter and later by Richard Branson.
In 1857 Sir George Cayley died in Scarborough. There is a memorial to his life at Hull University at the Scarborough Campus.
As so many Famous events happened in England and the rest of the British Isles over the centuries, I thought it would be a good idea to tell the various stories in my various articles of the many English and British Icons from the Anglo Saxon times to the present day’s current history.
Please visit my WW1 and WW2 Plane Art Prints Collection @ http://www.fabprints.com/PLANES.html
My other website is called Directory of British Icons: http://fabprints.webs.com
The Chinese call Britain The Island of Hero’s which I think sums up what we British are all about.
Copyright © 2010 Paul Hussey. All Rights Reserved.
About the Author
To visit the list and links to my other Blogg articles: http://bloggs.resourcez.com
Please visit my Funny Animal Art Prints Collection @ http://www.fabprints.com
My other website is called Directory of British Icons: http://fabprints.webs.com
The Chinese call England “The Island of Hero’s” which I think sums up what we English are all about.
Copyright © 2010 Paul Hussey. All Rights Reserved.
Model Aircraft views over Chester, Cheshire
|
|
RC Model Airplane #6 $19.95 This pre-painted scale model pilot is design for arf rc planes. It is made out of light plastic material. |
|
|
RC Airplane Scale Pilot Model #1 $19.95 This pre-painted scale model pilot is design for arf rc planes. It is made out of light plastic material. |
|
|
Mitsubishi Zero Fighter 50 Nitro Gas ARF Radio Remote Control RC Model Airplane $229 Japan’s Zero Fighter 50 Nitro Gas ARF Model RC Airplane The Mitsubishi A6M5 is a great scale airplane for anyone who likes scale flying. The kit includes a fiberglass fuselage and cowling. The wings are sheeted foam and covered. All covered surfaces are done in solartex cloth covering and then the whole airplane is airbrushed. All control surfaces have beveled leading edges and the control horn mounts are preinstalled. The wing is complete with CA hinges. The leading edge of the wing is pre-shaped. The kit includes full color decals. Wing span: 54 in / 1380mm Wing area: 543 sq in / 35 sq dm Flying weight: 6.1lb / 2800g Fuselage length: 45 in / 1140 mm Engine Required: 2c 0.46 cu in Radio Required: 4 channels,5 servos 4c 0.63 cu in or 5 channels,6 servos Top quality wood construction with fiberglass fuselage Comes with all hardware and accessories The Mitsubishi A6M was a light-weight naval fighter aircraft employed by the Japanese from 1940-45. More widely known by its Navy designation, Type 0 Carrier Fighter, or Zero, the plane gained a legendary reputation. A combination of excellent maneuverability and very long range made it one of the best fighters of its era. The most effective Japanese fighter of World War II was known by many names. To the Imperial Japanese Navy, it was the Type 0 Carrier Fighter, Model 52. To the U.S. Navy pilots who fought it in the skies over the Pacific, it was the "Zeke." And to the American public it was known as the Zero. By whatever name, the Imperial Japanese Navy’s Zero fighter was one of the most potent warplanes of World War II and probably the best all-around carrier-based fighter of the early 1940s. The Zero’s outstanding performance stemmed primarily from the fact that it weighed only 5,500 to 6,500 pounds fully loaded. For this reason the Zero was extremely maneuverable and had a fast rate of climb. At the time of its appearance in 1940, the Zero fighter has a performance package superior to an |
|
|
4-CHANNEL EP-Powered AT-6 Texan RC AIRPLANE Model Kit (Unassembled) $49.95 Features: 4 Channel Remote Control Airplane Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible Constructed with Super Tough, lightweight EPO material! Perfect appearance and emulation (Scale appearance, great attention has been given to details) True Classic Trainer of All Time! Decorative Waterslide Decals! Easy to Build & Endless Fun to Fly! Perfect Low-Wing Trainer! Rudder helps steer plane on ground on its scale landing gear for easy take off Shock Resistant Reinforced fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Huge Wing size, Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Excellent stability and aerobatic capability Detailed Body Structure High roll rate Super low speed for safety, Super low altitude for fun Crash Resistant Construction Easy to Fly, Easy to Control, Super stable for beginner Slow Speed Flying Capable, Good for Beginner Suitable for both beginners and experienced pilots Specifications: Wingspan: 900mm (35.4") Length: 680mm (26.7") Flying Weight: 480g (16.9 oz) Requirements: Drive System: 370 carbon brushed motor Servo: 3X 9g high speed micro servos ESC: 20A speed controller Battery: 9.6V 650mah Ni-MH Control system: 4 CH Multifunctional Radio Transmitter and Receiver Included: Airplane Kit Unassembled Screw Driver 4 Propellers English Manual |
|
|
J3 Piper Cub 3-Channel RTF Radio Remote Controlled RC Airplane $65 SD J3 Grasshopper Scale RC Plane 1:10 SCALE READY TO FLY Electric Powered RC Airplane, Brand New! 3 Channel J3 CUB R/C AIRPLANE KIT. Newest 380 Turbo model ! DIRECT FROM THE MANUFACTURE… You can get full control of speed, rudder, and elevator for this 3 Channel Accipiter Badius, this is newest arrival big plane with 35.5" wingspan and 28.8" body length. All you need in one box, radio, 8.4V NiMh re-chargeable battery pack, wall charger, manual in English version, ready to fly with extra 8 x AA batteries. 3 Channels Transmitter w/ ESC, Receiver, electronic variable speed control and 2 Servos already worth US$99 in Hobby Shop, now only start from US$1 you get full set plus a plane, motor, battery, wall charger and ready to flight! Assembly is a snap! With no tools required, you can be up and flying within minutes of opening the box! The 3-channel two-stick transmitter allows you to control up down, left-right and power settings and because it’s electric, you can fly where gas airplanes are not allowed. A comprehensive owners manual guides you through step by step to final assembly and pre-flight checks. Uses one rechargeable NiMH battery pack (included) and an automatic DC peak battery charger. The J3 CUB – get airborne today! The J3 CUB 3 Channel has successfully trained thousands of newbie radio controlled pilots worldwide. You’ll be flying within minutes of receiving this fully built airplane enjoying over 12 minute flight times on a single charge thanks to our new improved NiMH battery and ball bearing gear drive system. Equipped with a powerful speed electric motor, which starts with a push of a button, the J3 CUB is capable of take-offs from the ground with its huge powerful motor and wide wingspan. Specification: Battery Opearted 380 Motor Plane Ready to Fly, assembly can be done in 10 mins Digital Proportional Speed Controller Slow Speed Flying Capable, Goof for Beginner Shock Resistant Reinforced Foam uselage and Strong Wings 2 X 18g micro servo for Rudder and Elevator Control R/C Set included, Complete 3 Channel Control including Complete Left/Right Control by Rudder Complete Elevator Control Digital PROPORTIONAL Motor Speed Control Knob Superb Quality–Simply The Best RTF Plane you can find Up to 300Maltitude, over 15 mins flight time Powered by 8.4V NIMH re-chargable battery (110v adaptor included) Can Fly as a Glider (without Moto |
|
|
Airplane Crystal Set – for ch 8 $6 Airplane Crystal Set – for ch 8 |
|
|
Scale RC Airplane Pilot #2 $19.95 This pre-painted scale model pilot is design for arf rc planes. It is made out of light plastic material. |
|
|
Red Habciht 2600mm Remote Control Model Airplane Glider ARF $499.95 Habicht ARF Glider Spray painted fiberglass fuselage. Ready covered built-up wings and tails. Available in two color schemes, red & whie or blue & white. Specifcations Wingspan…………………2600mm Weight…………………….2900~3100g Lenght…………………….1245mm Wing Area………………..55 dm2 Wing Loading……………53~56g/dm2 Airfoil……………………..Clark Y 61 Modify Radio……………………..3~4 Channel 4~6 Servos |
|
|
4-Channel Electric Powered AT-6 Texan (Silver) RC Airplane Model Kit (Unassembled) $49.95 Features: 4 Channel Remote Control Airplane Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible Constructed with Super Tough, lightweight EPO material! Perfect appearance and emulation (Scale appearance, great attention has been given to details) True Classic Trainer of All Time! Decorative Waterslide Decals! Easy to Build & Endless Fun to Fly! Perfect Low-Wing Trainer! Rudder helps steer plane on ground on its scale landing gear for easy take off Shock Resistant Reinforced fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Huge Wing size, Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Excellent stability and aerobatic capability Detailed Body Structure High roll rate Super low speed for safety, Super low altitude for fun Crash Resistant Construction Easy to Fly, Easy to Control, Super stable for beginner Slow Speed Flying Capable, Good for Beginner Suitable for both beginners and experienced pilots Specifications: Wingspan: 900mm (35.4") Length: 680mm (26.7") Flying Weight: 480g (16.9 oz) Requirements: Drive System: 370 carbon brushed motor Servo: 3X 9g high speed micro servos ESC: 20A speed controller Battery: 9.6V 650mah Ni-MH Control system: 4 CH Multifunctional Radio Transmitter and Receiver Included: Airplane Kit Unassembled Screw Driver 4 Propellers English Manual |
|
|
Sky Hawk 3-Channel Radio Remote Control Slope Diver RC Airplane RTF $139.95 3-Channel SKY HAWK Ready-To-Fly Airplane, New~!!! w/ speed controller! One of Our top of the range ready to fly model aircraft and very popular – the Sky Hawk is an acrobatic motor driven glider, it poses fantastic “stay up” properties and in the right weather conditions can stay flying for an hour with the right pilot!! It uses full 3 channel radio control equipment which is easily moved to other models Although still very stable and easy to fly I would recommend this as your top choice for your second model. The Sky Hawk has opened a whole new world of soaring excitement for modelers everywhere by giving them a beautifully crafted electric-powered sailplane that goes together in about one hour including charging the battery, all that’s left for a modeler to do now is install the transmitter batteries, bolt on the tail, slide together the wing halves, charge the included Ni-Cd battery, and fly. Product Features: Three channel digital proportional radio control system 12 frequencies are available With speed 380 motor, well designed propeller and high capacity Ni-MH battery. Light weigh airplane can perform very well in the air for a period of over 10 minutes Assembly within minutes Durable plastic fuselage which is resistant to damage Easy to learn for beginner, and fun for skillful player Specs: Servo x 2 3-Channel Receiver 3-Channel Transmitter Radio Proportional speed controller Wingspan 1200MM Wingarea 16.6 dm Fuselage Length 870mm Power 380 Motor Battery 8.4 600mAH Flight time 10-20 minutes |
|
|
Tail-Wing for Sky Hark 3-Channel RC Airplane $4 Tail-Wing for Sky Hark 3-Channel RC Airplane |
|
|
Channel 6 Crystal Set for R/C Airplane $12 Channel 6 Crystal Set for R/C Airplane |
|
|
R/C Model Pilot #3 $19.95 These model airplane pilots are designed for CMP’s range of ARFs. Total of eight different models which are all pre-painted and no further job is needed! |
|
|
R/C Model Pilot #4 $19.95 These model airplane pilots are designed for CMP’s range of ARFs. Total of eight different models which are all pre-painted and no further job is needed! |
|
|
R/C Model Pilot #6 $19.95 These model airplane pilots are designed for CMP’s range of ARFs. Total of eight different models which are all pre-painted and no further job is needed! |
|
|
R/C Model Pilot #7 $19.95 These model airplane pilots are designed for CMP’s range of ARFs. Total of eight different models which are all pre-painted and no further job is needed! |
|
|
Blue Habciht 2600mm Remote Control Model Airplane Glider ARF $399.95 Habicht ARF Glider Spray painted fiberglass fuselage. Ready covered built-up wings and tails. Available in two color schemes, red & whie or blue & white. Specifcations Wingspan…………………2600mm Weight…………………….2900~3100g Lenght…………………….1245mm Wing Area………………..55 dm2 Wing Loading……………53~56g/dm2 Airfoil……………………..Clark Y 61 Modify Radio……………………..3~4 Channel 4~6 Servos |
|
|
Texan AT-6: Airplane Accessories $5 Texan AT-6: Airplane Accessories |
|
|
Accipiter Badius 3-Channel Radio Remote Control RC Airplane $55 Brand New, Huge Radio Controlled Aircraft – Accipter Badus Slope Diver Full 3 channel Radio control equipment included and installed !!! One of Our top of the range ready to fly model aircraft and very popular – the Accipter Badius is an acrobatic motor driven glider, it poses fantastic “stay up” properties and in the right weather conditions can stay flying for an hour with the right pilot!! It uses full 3 channel radio control equipment which is easily moved to other models Although still very stable and easy to fly I would recommend this as your top choice for your second model. The Accipiter Badius Slope Diver has opened a whole new world of soaring excitement for modelers everywhere by giving them a beautifully crafted electric-powered sailplane that goes together in about one hour including charging the battery, all that’s left for a modeler to do now is install the transmitter batteries, bolt on the tail, slide together the wing halves, charge the included Ni-CD battery, and fly. 1. Wingspan: 42 inches 1100mm 2. Length: 32 inches 820mm 3. Weight: 15.87 ounces 500g 4. Power Supply (flight pack): 8.4V 600mAh NiMh (7 cell) 8.4V 600mAh NiMh (7 cell) 5. Radio Equipment: Full 3 channel SD-27 Mhz. Full 3 channel SD-27 Mhz. 6. Motor: 380 380 7. Distance of Control: 1580 feet 500m 8. Rising velocity: 16 feet per second 5 meters per second 9. |
|
|
Accipiter Badius 3-Channel Radio Remote Control RC RTF Airplane $55 DIV.btn { float: right; border: #000 solid 1px; margin: 0; padding: 0; display: inline; } DIV.btn INPUT { background: #66A5FF url(‘http://us.i1.yimg.com/us.yimg.com/i/us/plus/el/btbgem.gif’); border-width: 0; color: #FFF; font-weight: bold; cursor: hand; cursor: pointer } DIV.btn { float: right; border: #000 solid 1px; margin: 0; padding: 0; display: inline; } –> Brand New, Huge Radio Controlled Aircraft – Accipter Badus Slope Diver Full 3 channel Radio control equipment included and installed !!! One of Our top of the range ready to fly model aircraft and very popular – the Accipter Badius is an acrobatic motor driven glider, it poses fantastic “stay up” properties and in the right weather conditions can stay flying for an hour with the right pilot!! It uses full 3 channel radio control equipment which is easily moved to other models Although still very stable and easy to fly I would recommend this as your top choice for your second model. The Accipiter Badius Slope Diver has opened a whole new world of soaring excitement for modelers everywhere by giving them a beautifully crafted electric-powered sailplane that goes together in about one hour including charging the battery, all that’s left for a modeler to do now is install the transmitter batteries, bolt on the tail, slide together the wing halves, charge the included Ni-CD battery, and fly. 1. Wingspan: 42 inches 1100mm 2. Length: 32 inches 820mm 3. Weight: 15.87 ounces 500g 4. Power Supply (flight pack): 8.4V 600mAh NiMh (7 cell) 8.4V 600mAh NiMh (7 cell) 5. Radio Equipment: Full 3 channel SD-27 Mhz. Full 3 channel SD-27 Mhz. 6. Motor: 380 380 7. Distance of Control: 1580 feet 500m 8. Rising velocity: 16 feet per second 5 meters per second 9. Flight time: 12 or more minutes on each charged flight pack (depending upon if you glide more). 10. Packing details: Each unit is packed in hard foam insulated box, complete with radio, |
|
|
Airplane ex-window $2 Airplane ex-window |
|
|
The New 2009 Model 4 Channel Warbird F4U Corsair RTF RC Ready to Fly Electric Airplane $84.95 4 Channel Full Function Radio Controlled (Aileron,Elevator,Rudder,Throttle) Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible Constructed with Super Tough, lightweight EPO material! Perfect appearance and emulation (Scale appearance, great attention has been given to details) True Classic Trainer of All Time! Decorative Waterslide Decals! Easy to Build & Endless Fun to Fly! Perfect Low-Wing Trainer! Rudder helps steer plane on ground on its scale landing gear for easy take off Ready to Fly in Just Minutes! Shock Resistant Reinforced fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Huge Wing size, Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight fuselage with pre-installed Electronics, Motor, Servos, and Speed Controller Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Powerful 370 motor with expert-designed propellers and hi-capacity Ni-MH battery pack Excellent stability and aerobatic capability Detailed Body Structure High roll rate Digital Proportional Motor Speed Control Super low speed for safety, Super low altitude for fun Crash Resistant Construction Easy to Fly, Easy to Control, Super stable for beginner Slow Speed Flying Capable, Good for Beginner Suitable for both beginners and experienced pilots Wingspan: 840mm (33") Length: 750mm (29.5") Flying Weight: 420g (14.8 oz) Drive System: 370 carbon brushed motor Servo: 3X 9g high speed micro servos ESC: 20A speed controller Battery: 9.6V 650mah Ni-MH Control system: 4 CH Multifunctional Radio Transmitter and Receiver Radio Control Range: 1000 feet (300m) Airplane (90% assembled) 4 Channel Multifunctional Radio Transmitter Wall Battery Charger High Quality Rechargeable 9.6V 650mah Ni-MH Battery English Manual 4 Propellers |
|
|
The New 2009 Model 4 Channel Warbird F4U Corsair RTF RC Ready to Fly Electric Airplane Gray Version $84.95 4 Channel Full Function Radio Controlled (Aileron,Elevator,Rudder,Throttle) Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible Constructed with Super Tough, lightweight EPO material! Perfect appearance and emulation (Scale appearance, great attention has been given to details) True Classic Trainer of All Time! Decorative Waterslide Decals! Easy to Build & Endless Fun to Fly! Perfect Low-Wing Trainer! Rudder helps steer plane on ground on its scale landing gear for easy take off Ready to Fly in Just Minutes! Shock Resistant Reinforced fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Huge Wing size, Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight fuselage with pre-installed Electronics, Motor, Servos, and Speed Controller Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Powerful 370 motor with expert-designed propellers and hi-capacity Ni-MH battery pack Excellent stability and aerobatic capability Detailed Body Structure High roll rate Digital Proportional Motor Speed Control Super low speed for safety, Super low altitude for fun Crash Resistant Construction Easy to Fly, Easy to Control, Super stable for beginner Slow Speed Flying Capable, Good for Beginner Suitable for both beginners and experienced pilots Wingspan: 840mm (33") Length: 750mm (29.5") Flying Weight: 420g (14.8 oz) Drive System: 370 carbon brushed motor Servo: 3X 9g high speed micro servos ESC: 20A speed controller Battery: 9.6V 650mah Ni-MH Control system: 4 CH Multifunctional Radio Transmitter and Receiver Radio Control Range: 1000 feet (300m) Airplane (90% assembled) 4 Channel Multifunctional Radio Transmitter Wall Battery Charger High Quality Rechargeable 9.6V 650mah Ni-MH Battery English Manual Screw Driver |
|
|
Scale RC Airplane Woman Pilot #3 $19.95 This pre-painted scale model pilot is design for arf rc planes. It is made out of light plastic material. |
|
|
Giant Scale Mosquito ARF Nitro Gas Radio Remote Controlled Twin-Engine RC Airplane ARF $499 Many of this model’s attributes attracted me to it, including the sweet sound of twin engines, extreme good looks, reputation for speed, scale outline, ease of assembly, and competitive price. This is one of those models I just had to begin as soon as I got it, and I’m sure it will have the same effect on you. The Mosquito is a top-quality ARF that ought to be on your buy list. You will not be disappointed and you will be the envy at your flying field. The 73" Mosquito ARF is a great scale airplane for anyone who likes scale flying. The kit includes a fiberglass fuselage, center section, and cowling done in matching paint. The wings are sheeted foam, covered with solartex, and painted to match. All control surfaces have beveled leading edges and the control horn mounts are preinstalled. The kit includes full color decals. Wing Span: 73" Weight: 11.01lb Length: 52.5" Wing Loading: 30.92oz./sq.ft. Wing Area: 821.5sq.in Engine Required: (2) 2c 25~32, 4c 26~30 Radio 5~6 Channel 7~9 Servos Out of the box: As all CMP this kit comes with all parts nicely wrapped in thin foam and plastic bags. Wing is 3 piece design, outer panels are all wood, sheeted rib design. Center section is combination of laser-cut wood ribs and fiberglass shell making it very strong base for twin engine and landing gear mounting. Ailerons and flaps are hinged and installed. Tail section is air foiled surfaces hinged and ready. Fuselage is very strong with servo tray installed for you. Beautiful fiberglass cowls and engine hatches, painted PVC canopy and fairings. Wheels, gas tank, motor mount compliments complete hardware package. Kit comes with fixed gear option, mechanical retracts can be installed and wing is designed for it. Decal sheet is included to finish the models look. Due to twin engine set-up, experience is required to assemble and fly this Warbird. One of the reasons you looked at this models is its history and unique appearance. Sound of twin engine and scale looks is what this is all about. Get one today and fly after short assembly period. You will love the attention this plane will get! Details Type: Semiscale ARF Pilot Skill Level: IntermediateWingspan: 73 inches Wing area: 1,286.5 square inches Length: 52.5 inches Weight: 11-11.5 pounds Wing loading: 20.6 ounces per square inch Engine: .25-.32 (two-stroke) or .26-.30 (four-stroke) Radio: Five- to six-channel transmitter, seven to nine servos (rudder, elevator, flaps, one for each aileron, one for each throttle, one for each optional retract) Construction: Molded fiberglass fuselage, tail sections, wing center-section, and engine nacelles with light-plywood support, balsa-and-plywood wing panels and sections Covering/finish: Three-color flat-finished camouflage paint over fiberglass, film covered wings and tail |
|
|
300XT R/C Outrunner Brushless Motor for Electric Radio Remote Control Airplane 1300 RPM $70 These brushless motors are radically powerful and they are efficient — longer flights on a charge. But there’s another aspect that’s better. They give a different "feel" to the flying of the model airplane: At half throttle, you’ll feel that the motor is silently pulling the airplane through the air at flying speeds — effortlessly. Then when you open the throttle to FULL you’ll see your airplane shoot ahead like you’ve never seen before — effortlessly and silently. You are seeing and "feeling" raw, silent power. It is mysterious. It is flight without limits. An excellent motor for the small indoor flyer such as the Ikarus Shock Flyers. Suitable for 2 or 3 lithium polymer cells operation. Battery Pack 2-3 Lithium polymer cells Current 4 Amps continuous KV 1300 rpm per Volt Prop (direct drive) 7? x 4? to 8? x 6? Body Diameter 25.6mm. Body Length 17.7mm. Weight 26g Shaft 3.0mm SMC-M-APMBL301 |
|
|
Main-Wing for (CCLEE) J3 Grasshopper R/C Airplane $15 Main-Wing for (CCLEE) J3 Grasshopper R/C Airplane |
|
|
Tail-Wing for (CCLEE) J3 Grasshopper R/C Airplane $7 Tail-Wing for (CCLEE) J3 Grasshopper R/C Airplane |
|
|
18G Micro RC Servo for SD R/C Airplane $10 18G Micro RC Servo for SD R/C Airplane |
|
|
3-Channel R/C Receiver for SD R/C Airplane $12 3-Channel R/C Receiver for SD R/C Airplane |
|
|
Airplane Crystal Set – for ch 6 $19.95 Airplane Crystal Set – for ch 6 |
|
|
Two Mini Airplane/Helicopter Motor $8 Two Mini Airplane/Helicopter Motor |
|
|
R/C Model Warbird Pilot #5 for Warbird Planes $19.95 These model airplane pilots are designed for CMP’s range of ARFs. Total of eight different models which are all pre-painted and no further job is needed! |
|
|
Military EDF Predator UCAV 101mm Electric Ducted Fan RC Airplane $319 The EDF Predator UCAV from Nitro Planes is a large fiberglass jet model with sheeted wings. It comes complete with landing gear, fiberglass canopy, missiles, and all hardware. The model can be powered by a 90mm to 101mm ( 3.5″ to 4″ ) EDF unit. EDF Predator UCAV 101mm Electric Ducted Fan Airplane Top Features Top quality wood construction with fiberglass fuselage Comes with all hardware and accessories Specifications Wing Span: 47.2 in / 1200mm Wing Area : 521 sq in / 33.8 sq dm Flying Weight : 6.6 lb / 3000 g Fuselage Length : 58.7 / 1490 mm Electronics Required : 4 Channels Radio Transmitter 5 Servos EDF : 101 mm / 4 in Brushless Motor : D36 x L 36 mm 2000 KV Speed Controller : 22.2 V ; 85A Li-poly Battery : 4000 mAh 25 C 22.2 V Click here for UCAV Review/Build Thread The fuselage and parts come well secured in the custom box. All the parts are covered in plastic or bagged. The control surfaces arrive attached with hinge material but need to be CA’ed in place after alignment. The fiberglass canopy is pre-finished and only needs the latch mechanism attached. The landing gear are fixed with a steerable nose wheel assembly. Two sheets of finishing decals are supplied and the 7-page manual, although sparse, provides sufficient photos and text to complete the model by an experienced assembler. Photos A closer look at the fuselage reveals the size, quality finish, construction techniques, and high level of pre-assembly. The T-nuts are already installed, and glued in place, for the gear mains and steerable nose wheel assembly. The battery and servo trays are also pre-installed. Photos Click here for UCAV Review/Build Thread |
|
|
ARF Nitro Gas Giles 202 – 50 – 55 " Remote Controlled RC Airplane – Almost Ready to Fly GreatPlanes! $189.95 The 50 sized Giles 202 features a stunning color scheme. The new & fresh style of colors breaks the traditonal covering and makes this aircraft one of a kind. This kit features carbon fiber landing gear which is durable, light and strong. This kit also comes with a PVC canopy, 300cc fuel tank, 55mm wheels, pushrod and complete hardware. The fuselage and tailplane are molded in one-piece to strengthen the model and save weight. Only a few simple tasks and you can get thei beauty in the air. These are the photos of the kit. Specs: Wingspan 55" Fuselage Length 55" Recommended Engine Size 2c/40,46 4c/ 50, 63 Flying Weight 5.4 – 5.6 lbs Wing Area 564 sq in Radio 4Ch 5 Airfoil NACA 0013 |
|
|
3-Channel Slope Diver RTF Radio Remote Controlled RC Electric Airplane $139 Brand New, Huge Radio Controlled Aircraft – Soarer Full 3 channel Radio control equipment included and installed !!! *BRAND NEW* ADVANCED 3-Channel R/C Airplane + a Full 3-CH Radio Control Transmitter completed with a Full set of 3 Channel FUTABA Attack 2ER Japanese telecontrol equipment to realize excellent control !!! NEW IN BOX !!! READY TO FLY IN MINUTES One of Our top of the range ready to fly model aircraft and very popular ? the soarer is an acrobatic motor driven glider, it poses fantastic ?stay up? properties and in the right weather conditions can stay flying for an hour with the right pilot!! It uses full 3 channel radio control equipment which is easily moved to other models Although still very stable and easy to fly I would recommend this as your top choice for your second model. The Soarer has opened a whole new world of soaring excitement for modellers everywhere by giving them a beautifully crafted electric-powered sailplane that goes together in about one hour including charging the battery, all that’s left for a modeller to do now is install the transmitter batteries, bolt on the tail, slide together the wing halves, charge the included Ni-Cd battery, and fly. 1. Wingspan: 42 inches 1100mm 2. Length: 32 inches 820mm 3. Weight: 15.87 ounces 500g 4. Power Supply (flight pack): 8.4V 600mAh NiMh (7 cell) 8.4V 600mAh NiMh (7 cell) 5. Radio Equipment: Full 3 channel SD-27 Mhz. Full 3 channel SD-27 Mhz. 6. Motor: 380 380 7. Distance of Control: 1580 feet 500m |
|
|
New J3 Piper Cub .60 – 71" Nitro Gas Radio Controlled Airplane ARF Kit $299.95 All wood, laser cut, fiber glass cowl, top quality ARF kit! One of the best J3 Piper Cub nitro-powered radio controlled model airplane. Specifications: Wing span:71 in/1800mm Fuselage Length: 46.5in /1180 mm Wing Area:653sq in/42sq dm Flying Weight:5.8lb/2650g Requirements: Radio Required:4 channels,5 servos Engine Required:2c 0.46-0.52cu in |
|
|
Airplane Crystal Set – for ch 4 $19.99 Airplane Crystal Set – for ch 4 |
|
|
130-MOTOR for DragonFly 2-CH RC Airplane $3 130-MOTOR for DragonFly 2-CH RC Airplane |
|
|
Speed Controller for Radio Remote Control Airplane 3380 to 3386 $49 Speed Controller for Radio Remote Control Airplane 3380 to 3386 Electric Speed Control for Radio Control Airplane OUR Electronic Speed Controllers ARE MADE FOR ALL Electric R/C Airplanes !!! Can power up to a 600-Motor! The Buy-It-Now price is for ONE Tamiya-Standard Style-SD-MC10ADP Speed Controller Currently, we have over 5,000 pcs of this in stock and need to sell at this low low price to make room for new arrivals ! This ESC retail at least over $50 in retail store (most places we distribute to sell for around $38 ) Who buys from us??? Our ESC are used by many manufacturers all over the world in r/c electric planes, and many schools and hobby institutions (mostly those engineering dudes)! "Designed to work with almost all Radio Control Systems" Compatiable w/: FUTABA, JR, HITEC, AIRTRONICS, GWS, SANWA & AASHAI Radio Systems This is the Great Planes Compatiable micro high frequency electronic speed control with the battery eliminator circuitry (BEC). It is designed for electric motors up to a speed 600 in size. It will handle up to an 8 cell battery pack and is rated for a maximum of 22 amps continous current. Great Planes for illustration purposes only. It is NOT included. Model of product: SD-MC10ADP, Voltage of work: 7.2-8.4V, Maximal output currency: 18A, Voltage drop: <0.4V, Weight: 22.5g, Size: 34.6*26.6*15.2mm Function: This second-generation digital proportional speed controller has the function of automatic protection on low voltage, low reduction voltage and fixed motor firing point; Yet, the biggest advantages are its sensitive reaction and strong anti-interference. Even when the sending set is turned off, the motor will not make error action. This ESC is safe, reliable, and powerful. Compact Powerhouse The SD-MC10ADP electronic speed control (ESC) is extremely compact to minimize weight and simplify installation. It is an ideal speed control for electric airplanes up to a speed 600 motor size. The throttle function is fully proportional, so you can go from a slow idle to full throttle utlilizing the throttle control on your transmitter. It uses a "safe start" system to prevent accidental motor starts. In order to activate the throttle, you must first advance the throttle to full on, wait a couple of seconds and then pull the throttle to full off. This then "arms" the throttle and you are then ready to advance the throttle and the motor and propellor will begin to turn. Battery Eliminator Circuitry (BEC) The battery eliminator circuitry allows you to use the battery that is powering the motor to also power the servos. The SD-MC10ADP can power both the receiver and up to three standard, mini or micro servos, then as the motor draws the current down in the battery, the SD-MC10ADP will cut off the po |
|
|
Zlin Z-50 Engine 46~52 – 56" Nitro Gas Radio Remote Controlled RC Airplane ARF $319 The Zlin Z-50 is one of the most famous sports planes used in aerobatics and this ARF NitroModel Z50 is built with all the aerodynamic characteristic of the real one! It is a very special aerobatic airplane made by quality balsa wood protected by clear coating. 90% of the model is pre-finished at the factory – you can enjoy flying this beauty with the least building time. And of course, it flies as good as it looks! Wing Span : 55.9 in / 1420mm Wing Area : 531 sq in / 34 sq dm Flying Weight : 5.5lb / 2480g Fuselage length : 43.3 in / 1100mm Engine Required : 2c : 0.46 4c: 0.52 Radio Required : 4channels 5 servos Decals included but not pre-applied. |
|
|
New English Blue J-3 Piper Cub 60 – 71" Nitro Gas Radio Remote Control Airplane Almost-Ready-to-Fly ARF $249 Super J-3 Piper Cub 60 – 71" ARF Scale Nitro Gas Radio Remote Control Airplane! A favorite with scale model builders, the Cub is now available with an unique "computer design and drawn" engineering, resulting in outstanding scale accuracy and easy kit assembly. This All-New Nitro Gas RC Super Cub ARF Blue J3 Piper Cub 60 makes for a perfect afternoon at the park! Made with lightweight, yet strong balsa construction, the stable flight characteristics make this a perfect airplane for the ARF fans, scale wing struts add to the appeal of this great looking airplane. Specs: Wing span: 71.5 in / 1820mm Fuselage Length: 46.5 in / 1180 mm Wing Area: 775 sq in / 50 sq dm Flying Weight: 5.6 lb / 2550 g User Requirements: Engine Required: 4c 0.52 – .60 cu in Radio Required: 4 channels, 5 servos FEATURES: Nearly all balsa construction already pre-covered. Includes all hardware parts and instruction manual. Exact scale outline is taken from original Piper 3-view drawing The All-New English Blue J-3 Piper Cub Radio Remote Control Airplane. Very adorable 40-60 class Piper J-3 Cub Piper Cub which reproduces the full-scale aircraft with amazing accuracy, using precise CAD engineering and data from original airplane. All balsa construction. Aluminum alloy framed cowl. Superb realism and build quality. All major components ready for immediate assembly. Almost Redy to Fly J-3 Piper Cub 60 |
|
|
NitroModels Zero Fighter 52 – 54" Scale Nitro Gas Radio Remote Control Warbird Airplane $99 Japan’s Zero Fighter 50 Nitro Gas ARF Model RC Airplane The Mitsubishi A6M5 is a great scale airplane for anyone who likes scale flying. The kit includes a fiberglass fuselage and cowling. The wings are built with balsa material to form internal structure and covered. All covered surfaces are done in solartex cloth covering and then the whole airplane is airbrushed. All control surfaces have beveled leading edges and the control horn mounts are preinstalled. The wing is complete with CA hinges. The leading edge of the wing is pre-shaped. The kit includes full color decals. Wing span: 54 in / 1380mm Wing area: 543 sq in / 35 sq dm Flying weight: 6.1lb / 2800g Fuselage length: 45 in / 1140 mm Engine Required: 2c 0.46 cu in Radio Required: 4 channels,5 servos 4c 0.63 cu in or 5 channels,6 servos Top quality wood construction with fiberglass fuselage Comes with all hardware and accessories The Mitsubishi A6M was a light-weight naval fighter aircraft employed by the Japanese from 1940-45. More widely known by its Navy designation, Type 0 Carrier Fighter, or Zero, the plane gained a legendary reputation. A combination of excellent maneuverability and very long range made it one of the best fighters of its era. The most effective Japanese fighter of World War II was known by many names. To the Imperial Japanese Navy, it was the Type 0 Carrier Fighter, Model 52. To the U.S. Navy pilots who fought it in the skies over the Pacific, it was the "Zeke." And to the American public it was known as the Zero. By whatever name, the Imperial Japanese Navy’s Zero fighter was one of the most potent warplanes of World War II and probably the best all-around carrier-based fighter of the early 1940s. The Zero’s outstanding performance stemmed primarily from the fact that it weighed only 5,500 to 6,500 pounds fully loaded. For this reason the Zero was extremely maneuverable and had a fast rate of climb. At the time of its appearance in 1940, the Zero fighter has a performance package superior to any other naval aircraft in the world. Speed, range, rate of climb, maneuverability and the ability to operate from aircraft carrier decks combined to forge a seemingly invincible weapon in the hands of the Japanese Navy. In the six months after Pearl Harbor, the Sentais (fighter Groups) equipped with the A6M so dominated the sky that the Imperial Forces had conquered over 12 million square miles. Over 10,000 Rei-sen (Zero) fighters were produced by the Japanese, and it is interesting to note that that the Zero weighted only 50% of the Corsair, one of the reasons being the lack of armor plate protection for |
|
|
Giles 202 – 50 – 55" Nitro Gas Radio Remote Controlled RC Airplane Aerobatic Aircraft $200 Giles 202 – 50 – 55" Nitro Gas Radio Remote Controlled RC Airplane Aerobatic Aircraft The 50 sized Giles 202 features a stunning color scheme. The new & fresh style of colors breaks the traditional covering and makes this aircraft one of a kind. This kit features carbon fiber landing gear which is durable, light and strong. This kit also comes with a PVC canopy, 300cc fuel tank, 55mm wheels, pushrod and complete hardware. The fuselage and tail plane are molded in one-piece to strengthen the model and save weight. Only a few simple tasks and you can get this beauty in the air. Wing Span: 55.1" Length: 55.4" Weight: 5.62lb Wing Area: 564.2sq.in Wing Loading: 23.03oz./sq.ft. Engine Required: 2c .40-.46, 2c .50-.63 Radio: 4 Channel 5 Servos ****************NOTE*************** Engine, servos, transmitter, and other electronic items are sold separately! This is an airplane kit only, no electronics! Assembly required. Due to the United States Post Office’s International shipping size limit, we can not ship this item outside of the United States, except Canada. |
|
|
Extra 330 – 98" Nitro Radio Remote Control RC Airplane $999 The Extra 330 ARC is a great aerobatic airplane. The Extra 330 is an airplane that can do all the smooth aerobatics as well as all the wild 3D maneuvers. The kit includes a light-ply fuselage and cowling done in red, white, yellow, and blue. The wings are sheeted foam and covered with matching covering. All control surfaces have beveled leading edges and the control horn mounts are preinstalled. The leading edge of the wing is pre-shaped. The kit includes full color decals. |
|
|
Airplane RC Crystal Set for Channel 4 $19 Airplane RC Crystal Set for Channel 4 |