RC MMOBOG

Welcome to the World of Remote Control Entertainment

I have no instr-book for my “Hygena Multi Turbo” Cooker; anyone UK got one, (cooker or book?) ?

To download a manual I need to know the model no; this cooker has 4 gas hobs, controls on R; push button igniter; lekky fan assist oven; grill in roof of oven; 3 knobs on L of front of oven; Temp, then 0-5,those both have red lights;3rd knob has 6 positions inc fan, light, ww,w, and no light. A clock on far R. It’s built-in so I can’t see ID plate.
Have you got same cooker (UK) and can you tell me model no.? Thanks in advance.

I found this on a forum where someone was asking the same question… Hope it helps

you can contact extracare,they are the NFI service company.tell them the model and they will oblige.08457 959722 or www.extracareservice.co.uk

High Quality Raiden 30A Brushless ESCElectronic Speed Controller $49.95 These types of speed controllers especially designed to offer high power and high efficiency combined with low weight and compact dimensions Model Dimension (mm) Weight with wire (g/oz) Current (A) / Current peak 10sec Cells/servos NiCd/NiMh Cells/servos Li-polymer Over Temp Protection Brake Programmable 30A 38x 24 x 6 22/0.78 25 / 35 6/4, 8/3, 10/2~3,12/2 2/4, 3/2~3, 4/2 Y Y Warning   - Once the battery pack is connected, handle the model with extreme care – Ensure that you are well clear of the propeller at all times. Rotating propellers are extremely dangerous! – Connect the battery pack just before flight and disconnect it immediately after landing – Do not connect speed controller to just ‘any’ kind of power source. Take care to ensure the right    Polarity of NiCd, NiMH or LI-polymer power packs. When using the wrong polarity, the speed controller will be severely damaged.

Raiden Outrunner Brushless Motor 400T 1100 RPM for RC Airplanes $49.95 This is an awesome direct drive Motor. Dollar for Dollar about the best upgrade for the GWS war-birds I have seen. This motor is comparable to the Mega 16/15/7. Similar to the Aurora 400T, and the Motor Max (MTM) 400T. This is a type A motor. Meaning the shaft is removable, and can be flipped from a pusher to a puller application. No more press fitting a shaft or buying a new bell if your shaft breaks. Simply loosen the set screw and the shaft pulls out for easy replacement or mounting configuration changes. Made with high temp and high RPM bearings, high temp magnets good beyond 180 degrees. Recently re-worked to provide a closer tolerance shaft fit. Comes with 3.0mm shaft but 2.3mm is available on request. The 400T comes with an "X" mount and screws (you will need connectors to the ESC). Fits in to any GWS type speed 400 gear box. And has fit every aluminum outrunner type mount we have tried so far. Mounting holes are 16mm (or roughly 5/8 in.) All shafts are 3mm but we usually stock 2.3mm shafts if you prefer. With the 2.3mm shaft a pinion from a GWS 400 gear box will fit perfectly. Also no more press fitting a pinion and risk bending the shaft. Simply slide the pinion on and apply a dab of lock tight. 400T : Direct Drive 32 Turns ~ 1330kv ~ 12 amps KV: 1330    Weight: 1.6oz (46g)    Diameter: 26mm    Length: 24mm    Shaft: 3.0mm (2.3 avail.) Direct Drive Stats (Factory Stats) Prop Battery Thrust oz. Amps 7 x 4 11.1v Lipo 16 oz. 10 Amps 8 x 4 11.1v Lipo 17 oz. 8 Amps 9 x 5 11.1v Lipo 20 oz. 11 Amps Direct Drive Stats (Stats by us at 4,907′ above sea level) Prop Volts Thrust oz. Amps RPM Pitch Speed MPH No Load 12.2 – 0.8 1330KV – No Load 7.9 – 0.6 1330KV – 6 x 5.5 12.1 10 oz. 9.2 Amps Unknown – 7 x 5 12 16 oz. 12 Amps 12100 57 7 x 4 12.4 15 oz. 10 Amps Unknown – 8×6 12 18 oz. 19 Amps 8600 49 8 x 3.8 12 21 oz. 15 Amps 10900 39 Geared 2.4:1 Stats (obtained at 4907′ feet) Prop Volts Thrust oz. Amps RPM Pitch Speed MPH 8 x 6 12 13 oz. 5.8 Amps 7050 40 9 x 3.8 12 14 oz. 5 Amps 7200 26

1/8Th Scale Exceed RC Nitro Power GP 4WD MadStorm Monster Truck Ready to Run RTR Bravo Red Version $599.95 The new generation of 1/8 Monster trucks are here with much newly added features and functions. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again. This massive monster truck comes with Level .21 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 150cc. The impressiveness of the MadStorm can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadStorm are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you don’t have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadStorm to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadStorm will lead the way to new standards for the RC world and conquer all. The 4WD Engine-powered Monster Truck MadStorm will Push your Imagination into overdrive! FX-2 Sport Radio& Engine 21 Level WheelBase:15" Weight:5.2kg Polished 6061 Aluminum Chassis Plates Massive pre-glued 6.75" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub 1-Speed Transmission Heavy Duty Metal Gear Steering Servo 150cc Flip-top Fuel Tank Adjustable Threaded Aluminum Shocks Aluminum Muffler Hardeded and Coated Steel Gears Multi-piece rollbar Steel High-Temp Brake Disc Heavy Duty Slipper Clutch 3-Shoe Racing Clutch Full Sealed Ball Bearing Set All Assembled with Radio Control and Ready to Run Over the Competition!

Exceed RC 1/8Th Scale Nitro Gas Power .28 Engine Ready to Run Buggy Gama Orange Racing Edition $599 The new generation of 1/8 Buggy are here with much newly added features and functions. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again. This massive 1/8 MadFire Buggy comes with Level .28 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 125cc. The impressiveness of the MadFire can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadFire are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you don’t have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadFire to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadFire will lead the way to new standards for the RC world and conquer all. The 4WD Engine-powered Monster Buggy MadFire will Push your Imagination into overdrive! FX-2 Sport Radio& Engine 28 Level WheelBase:15" Weight:5.2kg Polished 6061 Aluminum Chassis Plates Massive pre-glued 4.75" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub 1-Speed Transmission Heavy Duty Metal Gear Steering Servo 150cc Flip-top Fuel Tank Adjustable Threaded Aluminum Shocks Aluminum Muffler Hardeded and Coated Steel Gears Multi-piece rollbar Steel High-Temp Brake Disc Heavy Duty Slipper Clutch 3-Shoe Racing Clutch Full Sealed Ball Bearing Set All Assembled with Radio Control and Ready to Run Over the Competition!

1/8Th Scale Exceed RC Nitro Power GP 4WD MadStorm Monster Truck Ready to Run RTR Bravo Red Racing Edition $599.95 The new generation of 1/8 Monster trucks are here with much newly added features and functions. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again. This massive monster truck comes with Level .28 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 150cc. The impressiveness of the MadStorm can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadStorm are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you don’t have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadStorm to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadStorm will lead the way to new standards for the RC world and conquer all. The 4WD Engine-powered Monster Truck MadStorm will Push your Imagination into overdrive! FX-2 Sport Radio& Engine 28 Level WheelBase:15" Weight:5.2kg Polished 6061 Aluminum Chassis Plates Massive pre-glued 6.75" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub 1-Speed Transmission Heavy Duty Metal Gear Steering Servo 150cc Flip-top Fuel Tank Adjustable Threaded Aluminum Shocks   Aluminum Muffler Hardeded and Coated Steel Gears Multi-piece rollbar Steel High-Temp Brake Disc Heavy Duty Slipper Clutch 3-Shoe Racing Clutch Full Sealed Ball Bearing Set All Assembled with Radio Control and Ready to Run Over the Competition!

Exceed RC 1/8Th Scale MadStorm Monster Truck .21 Engine Nitro Power 100% Ready to Run Star Green Version $599.95 The new generation of 1/8 Monster trucks are here with much newly added features and functions. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again. This massive monster truck comes with Level .21 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 150cc. The impressiveness of the MadStorm can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadStorm are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you don’t have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadStorm to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadStorm will lead the way to new standards for the RC world and conquer all. The 4WD Engine-powered Monster Truck MadStorm will Push your Imagination into overdrive! FX-2 Sport Radio& Engine 21 Level WheelBase:15" Weight:5.2kg Polished 6061 Aluminum Chassis Plates Massive pre-glued 6.75" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub 1-Speed Transmission Heavy Duty Metal Gear Steering Servo 150cc Flip-top Fuel Tank Adjustable Threaded Aluminum Shocks Aluminum Muffler Hardeded and Coated Steel Gears Multi-piece rollbar Steel High-Temp Brake Disc Heavy Duty Slipper Clutch 3-Shoe Racing Clutch Full Sealed Ball Bearing Set All Assembled with Radio Control and Ready to Run Over the Competition!

Exceed RC 1/8 GP Nitro 4WD MadStorm Monster Truck RTR w/ .28 Engine Alpha Blue RacingEdition $599.95 The new generation of 1/8 Monster trucks are here with much newly added features and functions. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again. This massive monster truck comes with Level .28 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 150cc. The impressiveness of the MadStorm can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadStorm are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you don’t have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadStorm to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadStorm will lead the way to new standards for the RC world and conquer all. The 4WD Engine-powered Monster Truck MadStorm will Push your Imagination into overdrive! FX-2 Sport Radio& Engine 28 Level WheelBase:15" Weight:5.2kg Polished 6061 Aluminum Chassis Plates Massive pre-glued 6.75" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub 1-Speed Transmission Heavy Duty Metal Gear Steering Servo 150cc Flip-top Fuel Tank Adjustable Threaded Aluminum Shocks   Aluminum Muffler Hardeded and Coated Steel Gears Multi-piece rollbar Steel High-Temp Brake Disc Heavy Duty Slipper Clutch 3-Shoe Racing Clutch Full Sealed Ball Bearing Set All Assembled with Radio Control and Ready to Run Over the Competition!

1/8Th Scale .28 Engine Nitro Fuel Powered Exceed RC Ready to Run MadFire Gama Green Racing Edition $599 The new generation of 1/8 Buggy are here with much newly added features and functions. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again. This massive 1/8 MadFire Buggy comes with Level .28 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 125cc. The impressiveness of the MadFire can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadFire are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you don’t have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadFire to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadFire will lead the way to new standards for the RC world and conquer all. The 4WD Engine-powered Monster Buggy MadFire will Push your Imagination into overdrive! FX-2 Sport Radio& Engine 28 Level WheelBase:15" Weight:5.2kg Polished 6061 Aluminum Chassis Plates Massive pre-glued 4.75" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub 1-Speed Transmission Heavy Duty Metal Gear Steering Servo 150cc Flip-top Fuel Tank Adjustable Threaded Aluminum Shocks Aluminum Muffler Hardeded and Coated Steel Gears Multi-piece rollbar Steel High-Temp Brake Disc Heavy Duty Slipper Clutch 3-Shoe Racing Clutch Full Sealed Ball Bearing Set All Assembled with Radio Control and Ready to Run Over the Competition!

1/8Th Scale Exceed RC GP .28 Engine 4WD Buggy MadFire Buggy Nitro Gas Powered Alpha Blue Racing Edition $599 The new generation of 1/8 Buggy are here with much newly added features and functions. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again. This massive 1/8 MadFire Buggy comes with Level .28 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 125cc. The impressiveness of the MadFire can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadFire are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you don’t have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadFire to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadFire will lead the way to new standards for the RC world and conquer all. The 4WD Engine-powered Monster Buggy MadFire will Push your Imagination into overdrive! FX-2 Sport Radio& Engine 28 Level WheelBase:15" Weight:5.2kg Polished 6061 Aluminum Chassis Plates Massive pre-glued 4.75" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub 1-Speed Transmission Heavy Duty Metal Gear Steering Servo 150cc Flip-top Fuel Tank Adjustable Threaded Aluminum Shocks Aluminum Muffler Hardeded and Coated Steel Gears Multi-piece rollbar Steel High-Temp Brake Disc Heavy Duty Slipper Clutch 3-Shoe Racing Clutch Full Sealed Ball Bearing Set All Assembled with Radio Control and Ready to Run Over the Competition!

1/8Th Scale Exceed RC MadWarrior .28 Engine Nitro Gas Powered Ready to Run Off Road Truggy Alpha Blue Racing Edition $599 The new generation of 1/8 Truggy are here with much newly added features and functions. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again.   This massive 1/8 MadWarrior Truggy comes with Level .28 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 150cc. The impressiveness of theMadWarrior Truggy can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadWarrior Truggy are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you don’t have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadWarrior Truggy to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadWarrior Truggy will lead the way to new standards for the RC world and conquer all. The 4WD Engine-powered Truggy MadWarrior will Push your Imagination into overdrive! FX-2 Sport Radio& Engine 28 Level WheelBase:15" Weight:5.2kg Polished 6061 Aluminum Chassis Plates Massive pre-glued 5" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub 1-Speed Transmission Heavy Duty Metal Gear Steering Servo 150cc Flip-top Fuel Tank Adjustable Threaded Aluminum Shocks Aluminum Muffler Hardeded and Coated Steel Gears Multi-piece rollbar Steel High-Temp Brake Disc Heavy Duty Slipper Clutch 3-Shoe Racing Clutch Full Sealed Ball Bearing Set All Assembled with Radio Control and Ready to Run Over the Competition!

Exceed RC 1/8 GP Nitro 4WD MadStorm Monster Truck RTR w/ .21 Engine Alpha Blue Limit Edition $499.95 The new generation of 1/8 Monster trucks are here with much newly added features and functions. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again. This massive monster truck comes with Level .21 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 150cc. The impressiveness of the MadStorm can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadStorm are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you don’t have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadStorm to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadStorm will lead the way to new standards for the RC world and conquer all. The 4WD Engine-powered Monster Truck MadStorm will Push your Imagination into overdrive! FX-2 Sport Radio& Engine 21 Level WheelBase:15" Weight:5.2kg Polished 6061 Aluminum Chassis Plates Massive pre-glued 6.75" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub 1-Speed Transmission Heavy Duty Metal Gear Steering Servo 150cc Flip-top Fuel Tank Adjustable Threaded Aluminum Shocks   Aluminum Muffler Hardeded and Coated Steel Gears Multi-piece rollbar Steel High-Temp Brake Disc Heavy Duty Slipper Clutch 3-Shoe Racing Clutch Full Sealed Ball Bearing Set All Assembled with Radio Control and Ready to Run Over the Competition!

Exceed RC 1/8Th Scale Nitro Gas Power .21 Engine Ready to Run Buggy Gama Orange Limited Edition $579.95 The new generation of 1/8 Buggy are here with much newly added features and functions. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again. This massive 1/8 MadFire Buggy comes with Level .21 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 125cc. The impressiveness of the MadFire can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadFire are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you don’t have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadFire to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadFire will lead the way to new standards for the RC world and conquer all. The 4WD Engine-powered Monster Buggy MadFire will Push your Imagination into overdrive! FX-2 Sport Radio& Engine 21 Level WheelBase:15" Weight:5.2kg Polished 6061 Aluminum Chassis Plates Massive pre-glued 4.75" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub 1-Speed Transmission Heavy Duty Metal Gear Steering Servo 125cc Flip-top Fuel Tank Adjustable Threaded Aluminum Shocks      Radio Transmitter: 2 Channel AM 27MHz Aluminum Muffler Powerful .21 Nitro Engine Built-In Innovative Servo Power Saving Concept Aluminum Rear Shocks   Aluminum Rear Plate Full Metal Gear Front CVD Drive Shaft Makes Smooth Turns and Prevent Dust Aluminum Muffler Hardeded and Coated Steel Gears Multi-piece rollbar Steel High-Temp Brake Disc Heavy Duty Slipper Clutch 3-Shoe Racing Clutch Length: 17.12 Inches Width:  12.20 Inches Height:  7.48  Inches Gear Ratio: 1:10.9 Full Sealed Ball Bearing Set All Assembled with Radio Control and Ready to Run Over the Competition!

Passion 3D 60 Nitro Gas Radio Remote Control Airplane RC Aerobatic Plane ARF $249 Brand New In Box, nitro gas powered, radio controlled, Almost-Ready-to-Fly 60 3D Passion Airplane. It is designed for intermediate or advanced modeler.   BRAND NEW IN BOX kit of the R/C  Passion 3D.  This kit is complete and 100% Guaranteed Factory Fresh!   This kit is 100% Scale to the real plane.  4-Channels Airplane !  Great collection for all fans !!! All-balsa construction keeps the plane lightweight, yet strong. Includes retractable landing gear for added realism The Passion 3D airplane is a great little aerobat that will do all you can ask of an airplane.  Anyone who likes 3D flying is bound to love this airplane.  The kit includes a light-ply fuselage and cowling done in red, white, and blue.  The wings are built-up and covered with matching covering.  The main wing is double beveled for maximum throw.  The wing is complete with CA hinges. The Passion 3D is made of laser cut materials making a perfect and accurate flying machine.  The use of stringently selected wood results in an extremely light airplane.  The airplane is covered in a low temp polyester film.  We chose clear so one could see the extreme attention to detail.  This aircraft is an excellent 3D performer and flies exceptionally well.  Fiberglass cowl and wheel pants included.  Also included are color decals.  Engine / Servos Sold Seperately.  Kit Requires assembly.  Can be flight-ready in 3-5 hours.  Picture is for illustration purposes only.   WYSWYG / Engine / Servos Sold Seperately.  Kit Requires assembly.  Can be flight-ready in 3-5 hours Specs: Wingspan 55 inches Length 61.5 inches All built light-ply Fuse Recommended engine size: 60-2c                                                  70-4c Wing Area is 775 in?#60;br> Weight 5.5-5.75lbs Airfoil 18% Radio Req’d 4ch, 5 Servo

1/8Th Scale .21 Engine Nitro Fuel Powered Exceed RC Ready to Run MadFire Gama Green Version $579.95 The new generation of 1/8 Buggy are here with much newly added features and functions. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again. This massive 1/8 MadFire Buggy comes with Level .21 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 125cc. The impressiveness of the MadFire can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadFire are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you don’t have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadFire to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadFire will lead the way to new standards for the RC world and conquer all. The 4WD Engine-powered Monster Buggy MadFire will Push your Imagination into overdrive! FX-2 Sport Radio& Engine 21 Level WheelBase:15" Weight:5.2kg Polished 6061 Aluminum Chassis Plates Massive pre-glued 4.75" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub 1-Speed Transmission Heavy Duty Metal Gear Steering Servo 125cc Flip-top Fuel Tank Adjustable Threaded Aluminum Shocks      Radio Transmitter: 2 Channel AM 27MHz Aluminum Muffler Powerful .21 Nitro Engine Built-In Innovative Servo Power Saving Concept Aluminum Rear Shocks   Aluminum Rear Plate Full Metal Gear Front CVD Drive Shaft Makes Smooth Turns and Prevent Dust Aluminum Muffler Hardeded and Coated Steel Gears Multi-piece rollbar Steel High-Temp Brake Disc Heavy Duty Slipper Clutch 3-Shoe Racing Clutch Length: 17.12 Inches Width:  12.20 Inches Height:  7.48  Inches Gear Ratio: 1:10.9 Full Sealed Ball Bearing Set All Assembled with Radio Control and Ready to Run Over the Competition!

1/8Th Scale Exceed RC GP .21 Engine 4WD Buggy MadFire Buggy Nitro Gas Powered Alpha Blue Version $579.95 The new generation of 1/8 Buggy are here with much newly added features and functions. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again. This massive 1/8 MadFire Buggy comes with Level .21 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 125cc. The impressiveness of the MadFire can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadFire are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you don’t have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadFire to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadFire will lead the way to new standards for the RC world and conquer all. The 4WD Engine-powered Monster Buggy MadFire will Push your Imagination into overdrive! FX-2 Sport Radio& Engine 21 Level WheelBase:15" Weight:5.2kg Polished 6061 Aluminum Chassis Plates Massive pre-glued 4.75" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub 1-Speed Transmission Heavy Duty Metal Gear Steering Servo 125cc Flip-top Fuel Tank Adjustable Threaded Aluminum Shocks      Radio Transmitter: 2 Channel AM 27MHz Aluminum Muffler Powerful .21 Nitro Engine Built-In Innovative Servo Power Saving Concept Aluminum Rear Shocks   Aluminum Rear Plate Full Metal Gear Front CVD Drive Shaft Makes Smooth Turns and Prevent Dust Aluminum Muffler Hardeded and Coated Steel Gears Multi-piece rollbar Steel High-Temp Brake Disc Heavy Duty Slipper Clutch 3-Shoe Racing Clutch Length: 17.12 Inches Width:  12.20 Inches Height:  7.48  Inches Gear Ratio: 1:10.9 Full Sealed Ball Bearing Set All Assembled with Radio Control and Ready to Run Over the Competition!

Exceed RC 1/8Th Scale MadStorm Monster Truck .28 Engine Nitro Power 100% Ready to Run Star Green Racing Edition $599.95 The new generation of 1/8 Monster trucks are here with much newly added features and functions. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again. This massive monster truck comes with Level .28 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 150cc. The impressiveness of the MadStorm can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadStorm are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you don’t have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadStorm to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadStorm will lead the way to new standards for the RC world and conquer all. The 4WD Engine-powered Monster Truck MadStorm will Push your Imagination into overdrive! FX-2 Sport Radio& Engine 28 Level WheelBase:15" Weight:5.2kg Polished 6061 Aluminum Chassis Plates Full Sealed Ball Bearing Set All Assembled with Radio Control and Ready to Run Over the Competition! Massive pre-glued 6.75" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub 1-Speed Transmission Heavy Duty Metal Gear Steering Servo 150cc Flip-top Fuel Tank Adjustable Threaded Aluminum Shocks   Aluminum Muffler Hardeded and Coated Steel Gears Multi-piece rollbar Steel High-Temp Brake Disc Heavy Duty Slipper Clutch 3-Shoe Racing Clutch   New Page 2 The new generation of 1/8 Monster trucks are here with much newly added features and functions. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again. This massive monster truck comes with Level .28 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 150cc. The impressiveness of the MadStorm can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadStorm are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you don’t have to worry about it breaking. Even the rims are

Traxxas Motor – 1/16 E-Revo/Slash Velineon 380 $80 The Velineon 380 brushless motor is precision-matched for use in 1/16th scale Traxxas models, delivering the perfect balance of brutal horsepower and long run times. Smooth-running performance is built in with ultra high-temperature sintered Neodymium magnets, high-speed ball bearings, and a precision balanced rotor. It all adds up to 50,000 rpm of pure power and track-searing speed! Features: Powerful 8-turn, 4000kv design Optimized for smooth sensorless power No motor brushes or commutator to wear out Virtually maintenance free power that stays consistent, run after run Precision balanced rotor Ultra high-temperature sintered Neodymium motor magnets Gold-plated 3.5mm bullet connectors Specifications: Type: Sensorless Brushless RPM/volt: 4000 (8-Turn) Magnet Type: Ultra High-Temp. Sintered Neodymium Connection Type: TRX 3.5mm Bullet Wire Size: 16-Gauge Maxx® Cable Current Ratings: 25A constant / 50A burst Max RPM: 50,000 Weight: 140g (4.94oz)

Exceed RC 1/8 GP MadStorm Nitro 4WD Monster RC Truck 100% RTR w/ .21 Engine for Beginners [Alpha Blue] $194.7 The new generation of 1/8 Monster trucks are here with much newly added features and functions. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again. This massive monster truck comes with Level .21 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 150cc. The impressiveness of the MadStorm can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadStorm are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you don?t have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadStorm to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadStorm will lead the way to new standards for the RC world and conquer all. The 4WD Engine-powered Monster Truck MadStorm will Push your Imagination into overdrive! FX-2 Sport Radio& Engine 21 Level WheelBase:15" Weight:5.2kg Polished 6061 Aluminum Chassis Plates Massive pre-glued 6.75" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub 1-Speed Transmission Heavy Duty Metal Gear Steering Servo 150cc Flip-top Fuel Tank Adjustable Threaded Aluminum Shocks   Aluminum Muffler Hardeded and Coated Steel Gears Multi-piece rollbar Steel High-Temp Brake Disc Heavy Duty Slipper Clutch 3-Shoe Racing Clutch Full Sealed Ball Bearing Set All Assembled with Radio Control and Ready to Run Over the Competition!

Exceed RC 1/8th Scale MadStorm 4WD Nitro RC Monster Truck w/ .21 Engine 100% Ready to Run for Beginners [Star Green] $194.7 The new generation of 1/8 Monster trucks are here with much newly added features and functions. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again. This massive monster truck comes with Level .21 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 150cc. The impressiveness of the MadStorm can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadStorm are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you don?t have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadStorm to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadStorm will lead the way to new standards for the RC world and conquer all. The 4WD Engine-powered Monster Truck MadStorm will Push your Imagination into overdrive! FX-2 Sport Radio& Engine 21 Level WheelBase:15" Weight:5.2kg Polished 6061 Aluminum Chassis Plates Massive pre-glued 6.75" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub 1-Speed Transmission Heavy Duty Metal Gear Steering Servo 150cc Flip-top Fuel Tank Adjustable Threaded Aluminum Shocks Aluminum Muffler Hardeded and Coated Steel Gears Multi-piece rollbar Steel High-Temp Brake Disc Heavy Duty Slipper Clutch 3-Shoe Racing Clutch Full Sealed Ball Bearing Set All Assembled with Radio Control and Ready to Run Over the Competition!

Professional 1/8 GP Nitro 4WD Exceed RC MadStorm Monster Truck RTR w/ .28 Engine RacingEdition [Alpha Blue] $599 The new generation of 1/8 Monster trucks are here with much newly added features and functions. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again. This massive monster truck comes with Level .28 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 150cc. The impressiveness of the MadStorm can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadStorm are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you don?t have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadStorm to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadStorm will lead the way to new standards for the RC world and conquer all. The 4WD Engine-powered Monster Truck MadStorm will Push your Imagination into overdrive! FX-2 Sport Radio& Engine 28 Level WheelBase:15" Weight:5.2kg Polished 6061 Aluminum Chassis Plates Massive pre-glued 6.75" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub 1-Speed Transmission Heavy Duty Metal Gear Steering Servo 150cc Flip-top Fuel Tank Adjustable Threaded Aluminum Shocks   Aluminum Muffler Hardeded and Coated Steel Gears Multi-piece rollbar Steel High-Temp Brake Disc Heavy Duty Slipper Clutch 3-Shoe Racing Clutch Full Sealed Ball Bearing Set All Assembled with Radio Control and Ready to Run Over the Competition!

Professional 1/8th Nitro Scale Exceed RC MadFire RC Buggy w/ .28 Engine 100% Ready to Run Racing Edition [Game Green] $599 The new generation of 1/8 Buggy are here with much newly added features and functions. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again. This massive 1/8 MadFire Buggy comes with Level .28 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 125cc. The impressiveness of the MadFire can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadFire are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you don?t have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadFire to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadFire will lead the way to new standards for the RC world and conquer all. The 4WD Engine-powered Monster Buggy MadFire will Push your Imagination into overdrive! FX-2 Sport Radio& Engine 28 Level WheelBase:15" Weight:5.2kg Polished 6061 Aluminum Chassis Plates Massive pre-glued 4.75" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub 1-Speed Transmission Heavy Duty Metal Gear Steering Servo 150cc Flip-top Fuel Tank Adjustable Threaded Aluminum Shocks Aluminum Muffler Hardeded and Coated Steel Gears Multi-piece rollbar Steel High-Temp Brake Disc Heavy Duty Slipper Clutch 3-Shoe Racing Clutch Full Sealed Ball Bearing Set All Assembled with Radio Control and Ready to Run Over the Competition!    

Professional 1/8Th Scale Nitro Powered Exceed RC Ready to Run .28 MadWarrior RTR Racing Edition [Star Green] $599 The new generation of 1/8 Truggy are here with much newly added features and functions. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again.   This massive 1/8 MadWarrior Truggy comes with Level .28 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 150cc. The impressiveness of theMadWarrior Truggy can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadWarrior Truggy are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you don?t have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadWarrior Truggy to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadWarrior Truggy will lead the way to new standards for the RC world and conquer all.   The 4WD Engine-powered Truggy MadWarrior will Push your Imagination into overdrive! FX-2 Sport Radio& Engine 28 Level WheelBase:15" Weight:5.2kg Polished 6061 Aluminum Chassis Plates Massive pre-glued 5" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub 1-Speed Transmission Heavy Duty Metal Gear Steering Servo 150cc Flip-top Fuel Tank Adjustable Threaded Aluminum Shocks Aluminum Muffler Hardeded and Coated Steel Gears Multi-piece rollbar Steel High-Temp Brake Disc Heavy Duty Slipper Clutch 3-Shoe Racing Clutch Full Sealed Ball Bearing Set All Assembled with Radio Control and Ready to Run Over the Competition!

Professional 1/8Th Scale Exceed RC MadFire Nitro Gas Power Radio Control RC Buggy w/ .28 Engine 100% RTR Racing Edition [Gama Orange] $249 The new generation of 1/8 Buggy are here with much newly added features and functions. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again. This massive 1/8 MadFire Buggy comes with Level .28 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 125cc. The impressiveness of the MadFire can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadFire are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you don?t have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadFire to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadFire will lead the way to new standards for the RC world and conquer all. The 4WD Engine-powered Monster Buggy MadFire will Push your Imagination into overdrive! FX-2 Sport Radio& Engine 28 Level WheelBase:15" Weight:5.2kg Polished 6061 Aluminum Chassis Plates Massive pre-glued 4.75" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub 1-Speed Transmission Heavy Duty Metal Gear Steering Servo 150cc Flip-top Fuel Tank Adjustable Threaded Aluminum Shocks Aluminum Muffler Hardeded and Coated Steel Gears Multi-piece rollbar Steel High-Temp Brake Disc Heavy Duty Slipper Clutch 3-Shoe Racing Clutch Full Sealed Ball Bearing Set All Assembled with Radio Control and Ready to Run Over the Competition!        

Exceed RC 1/8th Scale MadStorm Nitro Power Monster RC Truck w/ .21 Engine, 4WD, 100% Ready to Run for Beginners [Bravo Red] $194.7 The new generation of 1/8 Monster trucks are here with much newly added features and functions. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again. This massive monster truck comes with Level .21 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 150cc. The impressiveness of the MadStorm can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadStorm are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you don?t have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadStorm to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadStorm will lead the way to new standards for the RC world and conquer all. The 4WD Engine-powered Monster Truck MadStorm will Push your Imagination into overdrive! FX-2 Sport Radio& Engine 21 Level WheelBase:15" Weight:5.2kg Polished 6061 Aluminum Chassis Plates Massive pre-glued 6.75" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub 1-Speed Transmission Heavy Duty Metal Gear Steering Servo 150cc Flip-top Fuel Tank Adjustable Threaded Aluminum Shocks Aluminum Muffler Hardeded and Coated Steel Gears Multi-piece rollbar Steel High-Temp Brake Disc Heavy Duty Slipper Clutch 3-Shoe Racing Clutch Full Sealed Ball Bearing Set All Assembled with Radio Control and Ready to Run Over the Competition!

Professional 1/8Th Scale Exceed RC MadWarrior .28 Engine Nitro Gas Powered Ready to Run Off Road Truggy Racing Edition [Alpha Blue] $269.95 The new generation of 1/8 Truggy are here with much newly added features and functions. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again.   This massive 1/8 MadWarrior Truggy comes with Level .28 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 150cc. The impressiveness of theMadWarrior Truggy can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadWarrior Truggy are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you don?t have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadWarrior Truggy to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadWarrior Truggy will lead the way to new standards for the RC world and conquer all. The 4WD Engine-powered Truggy MadWarrior will Push your Imagination into overdrive! FX-2 Sport Radio& Engine 28 Level WheelBase:15" Weight:5.2kg Polished 6061 Aluminum Chassis Plates Massive pre-glued 5" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub 1-Speed Transmission Heavy Duty Metal Gear Steering Servo 150cc Flip-top Fuel Tank Adjustable Threaded Aluminum Shocks Aluminum Muffler Hardeded and Coated Steel Gears Multi-piece rollbar Steel High-Temp Brake Disc Heavy Duty Slipper Clutch 3-Shoe Racing Clutch Full Sealed Ball Bearing Set All Assembled with Radio Control and Ready to Run Over the Competition!

Professional 1/8Th Scale Exceed RC Nitro Power GP 4WD MadStorm Monster Truck Ready to Run RTR Racing Edition [Bravo Red] $269.95 The new generation of 1/8 Monster trucks are here with much newly added features and functions. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again. This massive monster truck comes with Level .28 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 150cc. The impressiveness of the MadStorm can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadStorm are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you don?t have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadStorm to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadStorm will lead the way to new standards for the RC world and conquer all. The 4WD Engine-powered Monster Truck MadStorm will Push your Imagination into overdrive! FX-2 Sport Radio& Engine 28 Level WheelBase:15" Weight:5.2kg Polished 6061 Aluminum Chassis Plates Massive pre-glued 6.75" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub 1-Speed Transmission Heavy Duty Metal Gear Steering Servo 150cc Flip-top Fuel Tank Adjustable Threaded Aluminum Shocks   Aluminum Muffler Hardeded and Coated Steel Gears Multi-piece rollbar Steel High-Temp Brake Disc Heavy Duty Slipper Clutch 3-Shoe Racing Clutch Full Sealed Ball Bearing Set All Assembled with Radio Control and Ready to Run Over the Competition!

Exceed RC 1/8th Scale MadFire .21 Nitro Gas 4WD RC Buggy 100% RTR for Beginners [Gama Orange] $179.7 The new generation of 1/8 Buggy are here with much newly added features and functions. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again. This massive 1/8 MadFire Buggy comes with Level .21 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 125cc. The impressiveness of the MadFire can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadFire are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you don?t have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadFire to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadFire will lead the way to new standards for the RC world and conquer all. The 4WD Engine-powered Monster Buggy MadFire will Push your Imagination into overdrive! FX-2 Sport Radio& Engine 21 Level WheelBase:15" Weight:5.2kg Polished 6061 Aluminum Chassis Plates Massive pre-glued 4.75" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub 1-Speed Transmission Heavy Duty Metal Gear Steering Servo 125cc Flip-top Fuel Tank Adjustable Threaded Aluminum Shocks      Radio Transmitter: 2 Channel AM 27MHz Aluminum Muffler Powerful .21 Nitro Engine Built-In Innovative Servo Power Saving Concept Aluminum Rear Shocks   Aluminum Rear Plate Full Metal Gear Front CVD Drive Shaft Makes Smooth Turns and Prevent Dust Aluminum Muffler Hardeded and Coated Steel Gears Multi-piece rollbar Steel High-Temp Brake Disc Heavy Duty Slipper Clutch 3-Shoe Racing Clutch Length: 17.12 Inches Width:  12.20 Inches Height:  7.48  Inches Gear Ratio: 1:10.9 Full Sealed Ball Bearing Set All Assembled with Radio Control and Ready to Run Over the Competition!

Traxxas Velineon Brushless Power System – 1/10 Scale Waterproof $270 The next generation of extreme brushless horsepower is here, Ready-To-Race® from Traxxas?and now waterproof! Velineon™ is the ultimate brushless system delivering the tire-melting horsepower, supercharged speeds, and ease of use that you expect from Traxxas. Velineon VXL-3s ESC   Now Waterproof! Compatible with brushed, brushless, and sensored brushless motors Auto-detects the motor type Accepts NiCad, NiMH (4-10 cells), and LiPo (2-3 cells) battery packs Built-in two-stage low-voltage detection for LiPo battery packs Three drive profiles: Sport Mode, Race Mode, and Training Mode™ Gold-plated motor connectors Incredibly smooth sensorless operation Two-Stage Thermal Shutdown Protection Built-in auxiliary fan output for optional cooling fan Velineon 3500 Brushless Motor   Consistent, high-power output, run after run Low-maintenance Unique Traxxas design Ultra High-temp Neodymium magnets Efficient, high-speed ball bearings Precision-balanced rotor Accessible solder tabs Protective end cap 10-Turn, 3500kV Optimized for extreme power and efficiency in 1/10 vehicles Traxxas High-Current Connector   Shrouded wire connections (no shrink tube required) Wide surface area, gold-plated terminals Reverse polarity protection makes it impossible to connect backwards Textured surface for easy gripping Compatible with high-current 12-gauge wire Secure, positive locking terminals provide consistent contact Maintains smooth precision feel and low resistance even after thousands of uses Just plug it in and it works. The key to the Velineon?s extreme power output is total system optimization. Each component, from the Traxxas high-current battery connector, to the powerful Velineon 3500 brushless motor, is carefully engineered to work with other system components to eliminate restriction and allow maximum power flow. High-frequency transistors and advanced circuit design delivers incredibly smooth and refined throttle control. The Velineon system accepts the widest range of battery types, including 3-cell Lithium Polymer packs (3S LiPo packs). Built-in low-voltage detection in the VXL-3s electronic speed control helps keep LiPo battery packs in top condition. Traxxas? exclusive waterproof technology allows the Velineon system to operate in wet conditions, including mud and snow, with no special precautions required. You decide where the Velineonpowered adventure leads?the only limits are your imagination

Traxxas Velineon VXL-3M Brushless System – 1/16 E-Revo/Slash $200 The next generation of Extreme Brushless Horsepower is here, and it?s Ready-To-Race® from Traxxas! Velineon™ is the only name you need to know to achieve the tire-melting horsepower and supercharged speed you expect from brushless. Best of all, it?s brushless done the Traxxas way: wicked fast and easy to use. Just plug it in and it works. With speed potential that reaches beyond 50mph, Velineon is the new face of brushless performance. Nothing else even comes close. The key to the Velineon?s extreme power output is total system optimization. Each component, from the all-new Traxxas High-Current Battery Connector, to the powerful Velineon 380 Brushless Motor, is carefully engineered to work with other system components to eliminate restriction and allow maximum power flow. Right out of the box, Velineon is optimized to actually deliver the tire-melting horsepower, benchmark speed, and precision throttle response you expect! The Velineon 380 brushless motor is precision-matched for use in 1/16th scale Traxxas models, delivering the perfect balance of brutal horsepower and long run times. Smooth-running performance is built in with ultra high-temperature sintered Neodymium magnets, high-speed ball bearings, and a precision balanced rotor. The Velineon 380 can be used with many after-market brushless electronic speed controls, but is designed to work with the Traxxas VXL-3m Electronic Speed Control for optimal speed and efficiency. The key to the Velineon?s extreme power output is total system optimization. Each component is carefully engineered to work with the other system components to eliminate restriction and allow maximum power flow. The quest for ultimate speed began with the battery connector. With today?s high-density, high-discharge battery packs, having a wimpy connector is like attaching a garden hose to a fire hydrant. The pressure is there but the flow is strangled with resistance. The all-new Traxxas High-Current Connector flows current like a fire hose with virtually zero voltage loss due to power-robbing resistance. The patent-pending Traxxas Connector is made for the real world with large, easy-to-grip surfaces that are virtually impossible to plug in backwards. Beefy, gold-plated terminals with large, spring-loaded contact areas ensure positive current flow. Even after thousands of uses, Traxxas connectors maintain their precision feel and incredibly low resistance. Velineon 380 Specifications: Type: Sensorless Brushless RPM/volt: 4000 (8-Turn) Magnet Type: Ultra High-Temp. Sintered Neodymium Connection Type: TRX 3.5mm Bullet Wire Size: 16-Gauge Maxx® Cable Current Ratings: 25A constant / 50A burst Max RPM: 50,000 Weight: 140g (4.94oz) VXL-3m (Waterproof) ESC Specifications Input voltage: 6 to 12 cells NiMH

Traxxas Velineon Brushless Power System – 1/10 Scale $250 The next generation of extreme brushless horsepower is here, and its Ready-To-Race (TM) from Traxxas! Velineon (TM) is the ultimate brushless system delivering the tire-melting horse- power, supercharged speeds, and ease of use that you expect from Traxxas. Just plug it in and it works. The key to the Velineon’s extreme power output is total system optimization. Each component, from the all-new Traxxas high- current battery connector, to the powerful Velineon 3500 brushless motor, is carefully engineered to work with other system components to eliminate restriction and allow maximum power flow. High-frequency transistors and advanced circuit design delivers incredibly smooth and refined throttle control. The Velineon system accepts the widest range of battery types, including 3-cell LiPo packs. Built-in low-voltage detection in the VXL-3s electronic speed control helps maintain LiPo battery packs in top condition. The Velineon VXL-3s simplifies brushless technology with easy operation that gives you all the control you need for maximum fun. Quickly choose from 3 drive profiles in exactly the same manner as other Traxxas electronic speed controls (such as the XL-5). Profiles include: Sport, Race, and Training Mode (patent pending). Traxxas High-Current Connector  Shrouded wire connections – no shrink tube required Wide surface area, gold-plated terminals Reverse polarity protection makes it impossible to connect backwards Textured surface for easy gripping Compatible with high-current 12-gauge wire Secure, positive locking terminals provide consistent contact Maintains smooth precision feel and low resistance even after thousands of uses VXL-3s ECS   Compatible with brushed, brushless, and sensored brushless motors Auto-detects the motor type Accepts NiCd, NiMH (4-10 cells), and LiPo (2-3 cells) battery packs Built-in two-stage low-voltage detection for LiPo battery packs Three drive profiles: Sport Mode, Race Mode, and Training Modem Gold-plated motor connectors Incredibly smooth sensorless operation Two-Stage Thermal Shutdown Protection Built-in auxiliary fan output for optional cooling fan Velineon 3500 Brushless Motor   Consistent, high-power output, run after run Low-maintenance Unique Traxxas design Ultra High-temp Neodymium magnets Efficient, high-speed ball bearings Precision-balanced rotor Accessible solder tabs Protective end cap 10-Turn, 3500kV Optimized for extreme power and efficiency in 1/10 vehicles  

Exceed RC 1/8th Scale MadFire .21 Nitro Fuel 4WD Remote Control RC Buggy 100% RTR for Beginners [Gama Green] $179.7 The new generation of 1/8 Buggy are here with much newly added features and functions. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again. This massive 1/8 MadFire Buggy comes with Level .21 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 125cc. The impressiveness of the MadFire can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadFire are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you don?t have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadFire to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadFire will lead the way to new standards for the RC world and conquer all. The 4WD Engine-powered Monster Buggy MadFire will Push your Imagination into overdrive! FX-2 Sport Radio& Engine 21 Level WheelBase:15" Weight:5.2kg Polished 6061 Aluminum Chassis Plates Massive pre-glued 4.75" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub 1-Speed Transmission Heavy Duty Metal Gear Steering Servo 125cc Flip-top Fuel Tank Adjustable Threaded Aluminum Shocks      Radio Transmitter: 2 Channel AM 27MHz Aluminum Muffler Powerful .21 Nitro Engine Built-In Innovative Servo Power Saving Concept Aluminum Rear Shocks   Aluminum Rear Plate Full Metal Gear Front CVD Drive Shaft Makes Smooth Turns and Prevent Dust Aluminum Muffler Hardeded and Coated Steel Gears Multi-piece rollbar Steel High-Temp Brake Disc Heavy Duty Slipper Clutch 3-Shoe Racing Clutch Length: 17.12 Inches Width:  12.20 Inches Height:  7.48  Inches Gear Ratio: 1:10.9 Full Sealed Ball Bearing Set All Assembled with Radio Control and Ready to Run Over the Competition!

Exceed RC 1/8th Scale MadFire .21 Nitro Power 4WD RC Buggy 100% Ready for Fun for Beginners [Alpha Blue] $179.7 The new generation of 1/8 Buggy are here with much newly added features and functions. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again. This massive 1/8 MadFire Buggy comes with Level .21 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 125cc. The impressiveness of the MadFire can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadFire are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you don?t have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadFire to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadFire will lead the way to new standards for the RC world and conquer all. The 4WD Engine-powered Monster Buggy MadFire will Push your Imagination into overdrive! FX-2 Sport Radio& Engine 21 Level WheelBase:15" Weight:5.2kg Polished 6061 Aluminum Chassis Plates Massive pre-glued 4.75" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub 1-Speed Transmission Heavy Duty Metal Gear Steering Servo 125cc Flip-top Fuel Tank Adjustable Threaded Aluminum Shocks      Radio Transmitter: 2 Channel AM 27MHz Aluminum Muffler Powerful .21 Nitro Engine Built-In Innovative Servo Power Saving Concept Aluminum Rear Shocks   Aluminum Rear Plate Full Metal Gear Front CVD Drive Shaft Makes Smooth Turns and Prevent Dust Aluminum Muffler Hardeded and Coated Steel Gears Multi-piece rollbar Steel High-Temp Brake Disc Heavy Duty Slipper Clutch 3-Shoe Racing Clutch Length: 17.12 Inches Width:  12.20 Inches Height:  7.48  Inches Gear Ratio: 1:10.9 Full Sealed Ball Bearing Set All Assembled with Radio Control and Ready to Run Over the Competition!

1/8th Exceed-RC MAD BEAST Nitro-Powered Monster RC Truck 100% RTR w/ Reverse Function (Includes 3-Channel Digital Pistol Wheel Remote Control) $799.95 The new generation of 1/8 Monster trucks are here with much newly added features and functions. The MadBeasts are the pioneering brand of the Nitrorcx Exceed RC 1/8 tectonics. If you thought the 1/8 tectonics were impressive prepare to be astonished by the innovative Mad Beasts. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again.       For the first time in history, break through has come forth finally to have the world?s first reversible module to have reverse function in the MadBeasts. This massive monster truck comes with Level .28 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 270cc. The impressiveness of the MadBeast can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadBeasts are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you don?t have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadBeast to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadBeasts will lead the way to new standards for the RC world and conquer all. The 4WD Engine-powered Monster Truck with reverse gear will Push your Imagination into overdrive! Full Assembled Chassis with Painted body, and complete with Radio system!! Reverse gear, full ball bearings, all metal transmission gears, metal geared steering servos, this one has it all!!  FX-2 Sport Radio& Engine 28 Level WheelBase:15" Weight:5.2kg Polished 6061 Aluminum Chassis Plates Massive pre-glued 6.75" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub 2-Speed Transmission Heavy Duty Metal Gear Steering Servo 270cc Flip-top Fuel Tank Adjustable Threaded Aluminum Shocks Aluminum Muffler Hardeded and Coated Steel Gears Multi-piece rollbar Steel High-Temp Brake Disc Heavy Duty Slipper Clutch 3-Shoe Racing Clutch Full Sealed Ball Bearing Set All Assembled with Radio LCD Screen and Ready to Run Over the Competition! Exceed RC’s new 3 Channel Digital Proportional  radio offers more versatility than ever before! The all new Exceed-RC Digital Remote will satisfy any hobbyist needs. The Exceed RC Digital Remote will be available in AM and designed to offer easy tuning capabilities while racing and fine tunin

Professional 1/8th Scale Exceed RC MadStorm Monster Truck .28 Engine Nitro Power 100% Ready to Run Racing Edition [Star Green] $599 The new generation of 1/8 Monster trucks are here with much newly added features and functions. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again. This massive monster truck comes with Level .28 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 150cc. The impressiveness of the MadStorm can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadStorm are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you don?t have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadStorm to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadStorm will lead the way to new standards for the RC world and conquer all. The 4WD Engine-powered Monster Truck MadStorm will Push your Imagination into overdrive! FX-2 Sport Radio& Engine 28 Level WheelBase:15" Weight:5.2kg Polished 6061 Aluminum Chassis Plates Full Sealed Ball Bearing Set All Assembled with Radio Control and Ready to Run Over the Competition! Massive pre-glued 6.75" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub 1-Speed Transmission Heavy Duty Metal Gear Steering Servo 150cc Flip-top Fuel Tank Adjustable Threaded Aluminum Shocks   Aluminum Muffler Hardeded and Coated Steel Gears Multi-piece rollbar Steel High-Temp Brake Disc Heavy Duty Slipper Clutch 3-Shoe Racing Clutch   New Page 2 The new generation of 1/8 Monster trucks are here with much newly added features and functions. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again. This massive monster truck comes with Level .28 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 150cc. The impressiveness of the MadStorm can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadStorm are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you don?t have to worry about it breaking. Even

400F Outrunner RC Brushless Motor for 3D Radio Remote Control Park Flyer 2250 RPM $29.95 This motor is a thrust machine intended for speed 400 gear drives. Drawing 12-15 Amps. It can also run as direct drive (with small props) taking advantage of the 2150Kv speed. Runs on 2-3 cell lipo packs. On a 3 cell it will turn a 6 x 3 prop at 20,000 rpm. Perfect for an insane park jet or very respectable wing. This motor performs great geared in a GWS speed 400 gear box. 3:1 or 3.9:1 seem to be the best ratio for this one. That allows it to be great fit for any stick mount application. Provides over 30 oz. of thrust with the correct gear prop combo (see data below). Direct drive with 5" to 6" props for fast jet or wing (see videos).. Motor comes with AXI mount for direct drive and screws to fit in to any GWS type speed 400 gear box. Mounting holes are 16mm (or roughly 5/8 in.). Does not come with bullet type connectors to plug to the ESC. Aside form the awesome performance of this line of motors. They are extremely user friendly. This is a type A motor. Meaning the shaft is removable So you can swap from pusher jet or wing to your favorite puller application. No more press fitting a shaft or buying a new bell if your shaft breaks. Simply loosen 2 screws and the shaft pulls out for easy replacement or mounting configuration. Made with high temp and high RPM bearings, and high temp magnets good beyond 180 degrees. Also the first I have seen in the industry the stator is now double bonded to the housing. Keeps the stator from moving when crashed during high amp draw situations  With the 2.3mm shaft a pinion from a GWS 400 gear box will slide right on and secured with a dab of lock tight. No press fitting pinions and bending shatfs. The gear box allows easy manipulation of the motor to fit the speed, torque, and amp draw needed for your application. We also stock shafts, gear boxes, and apc props. Motor also accepts and is available with 3.0mm shafts. And any 3mm shaft can be used as a replacement. 400FA : Geared or Direct Drive 2150kv ~ 15 Apms (22 peak) ~ 26 Turns KV: 2150    Weight: 1.5oz (43g)    Diameter: 26mm    Length: 24mm    Shaft: 2.3mm or 3.0mm Direct Drive Stats (obtained at 4900 feet) Prop Battery Thrust oz. Amps 5.5 x 4.5 11.1v Lipo 20 oz. 20 Amps 6 x 5.5 11.1v Lipo 22 oz. 23 Amps Geared 3:1 Stats (obtained at 4900 feet) Prop Battery Thrust oz. Amps 9 x 7.5 11.1v Lipo 22 oz. 15 Amps 10×7 11.1v Lipo 27 oz. 18 Amps 11 x4.7 11.1v Lipo 29 oz. 16 Amps Geared 3.9:1 Stats (obtained at 4900 feet) Prop Battery Thrust oz. Amps 10×7 11.1v Lipo 20 oz.

NEW! 3D PASSION – 60 ARF Radio Controlled Nitro Gas RC Aerobatic Airplane $289 Brand New In Box, nitro gas powered, radio controlled, Almost-Ready-to-Fly 60 3D Passion Airplane. It is designed for intermediate or advanced modeler. BRAND NEW IN BOX kit of the R/C Passion 3D. This kit is complete and 100% Guaranteed Factory Fresh! This kit is 100% Scale to the real plane. 4-Channels Airplane ! Great collection for all fans !!! All-balsa construction keeps the plane lightweight, yet strong. Includes retractable landing gear for added realism The Passion 3D airplane is a great little aerobat that will do all you can ask of an airplane. Anyone who likes 3D flying is bound to love this airplane. The kit includes a light-ply fuselage and cowling done in red, white, and blue. The wings are built-up and covered with matching covering. The main wing is double beveled for maximum throw. The wing is complete with CA hinges. The Passion 3D is made of laser cut materials making a perfect and accurate flying machine. The use of stringently selected wood results in an extremely light airplane. The airplane is covered in a low temp polyester film. We chose clear so one could see the extreme attention to detail. This aircraft is an excellent 3D performer and flies exceptionally well. Fiberglass cowl and wheel pants included. Also included are color decals. Engine / Servos Sold Seperately. Kit Requires assembly. Can be flight-ready in 3-5 hours. Picture is for illustration purposes only. WYSWYG / Engine / Servos Sold Seperately. Kit Requires assembly. Can be flight-ready in 3-5 hours Specs: Wingspan 55 inches Length 61.5 inches All built light-ply Fuse Recommended engine size: 60-2c 70-4c Wing Area is 775 in?#60;br> Weight 5.5-5.75lbs Airfoil 18% Radio Req’d 4ch, 5 Servo ****************NOTE*************** Engine, servos, transmitter, and other electronic items are sold separately! This is an airplane kit only, no electronics! Assembly required. Due to the United States Post Office’s International shipping size limit, we can not ship this item outside of the United States, except Canada.

1/8Th Scale Exceed RC Beginner’s Nitro Power GP 4WD MadStorm Monster Truck Ready to Run RTR Bravo Red Version $499.95 The new generation of 1/8 Monster trucks are here with much newly added features and functions. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again. This massive monster truck comes with Level .21 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 150cc. The impressiveness of the MadStorm can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadStorm are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you don’t have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadStorm to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadStorm will lead the way to new standards for the RC world and conquer all. The 4WD Engine-powered Monster Truck MadStorm will Push your Imagination into overdrive! FX-2 Sport Radio& Engine 21 Level WheelBase:15" Weight:5.2kg Polished 6061 Aluminum Chassis Plates Massive pre-glued 6.75" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub 1-Speed Transmission Heavy Duty Metal Gear Steering Servo 150cc Flip-top Fuel Tank Adjustable Threaded Aluminum Shocks Aluminum Muffler Hardeded and Coated Steel Gears Multi-piece rollbar Steel High-Temp Brake Disc Heavy Duty Slipper Clutch 3-Shoe Racing Clutch Full Sealed Ball Bearing Set All Assembled with Radio Control and Ready to Run Over the Competition!

Exceed RC Mad Storm 1/8 Beginner’s Nitro Gas 4WD Monster Truck RTR w/ .21 Engine Alpha Blue Limit Edition $499.95 The new generation of 1/8 Monster trucks are here with much newly added features and functions. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again. This massive monster truck comes with Level .21 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 150cc. The impressiveness of the MadStorm can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadStorm are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you don’t have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadStorm to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadStorm will lead the way to new standards for the RC world and conquer all. The 4WD Engine-powered Monster Truck MadStorm will Push your Imagination into overdrive! FX-2 Sport Radio& Engine 21 Level WheelBase:15" Weight:5.2kg Polished 6061 Aluminum Chassis Plates Massive pre-glued 6.75" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub 1-Speed Transmission Heavy Duty Metal Gear Steering Servo 150cc Flip-top Fuel Tank Adjustable Threaded Aluminum Shocks   Aluminum Muffler Hardeded and Coated Steel Gears Multi-piece rollbar Steel High-Temp Brake Disc Heavy Duty Slipper Clutch 3-Shoe Racing Clutch Full Sealed Ball Bearing Set All Assembled with Radio Control and Ready to Run Over the Competition!

Exceed RC Mad Storm 1/8Th Scale MadStorm Monster Truck .21 Engine Nitro Power 100% Ready to Run Star Green Version $499.95 The new generation of 1/8 Monster trucks are here with much newly added features and functions. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again. This massive monster truck comes with Level .21 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 150cc. The impressiveness of the MadStorm can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadStorm are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you don’t have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadStorm to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadStorm will lead the way to new standards for the RC world and conquer all. The 4WD Engine-powered Monster Truck MadStorm will Push your Imagination into overdrive! FX-2 Sport Radio& Engine 21 Level WheelBase:15" Weight:5.2kg Polished 6061 Aluminum Chassis Plates Massive pre-glued 6.75" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub 1-Speed Transmission Heavy Duty Metal Gear Steering Servo 150cc Flip-top Fuel Tank Adjustable Threaded Aluminum Shocks Aluminum Muffler Hardeded and Coated Steel Gears Multi-piece rollbar Steel High-Temp Brake Disc Heavy Duty Slipper Clutch 3-Shoe Racing Clutch Full Sealed Ball Bearing Set All Assembled with Radio Control and Ready to Run Over the Competition!

1/8Th Scale Nitro Powered Exceed RC Ready to Run .28 MadWarrior RTR Star Green Racing Edition $599 The new generation of 1/8 Truggy are here with much newly added features and functions. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again. This massive 1/8 MadWarrior Truggy comes with Level .28 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 150cc. The impressiveness of theMadWarrior Truggy can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadWarrior Truggy are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you don’t have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadWarrior Truggy to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadWarrior Truggy will lead the way to new standards for the RC world and conquer all. The 4WD Engine-powered Truggy MadWarrior will Push your Imagination into overdrive! FX-2 Sport Radio& Engine 28 Level WheelBase:15″Weight:5.2kgPolished 6061 Aluminum Chassis Plates Massive pre-glued 5″ Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub1-Speed TransmissionHeavy Duty Metal Gear Steering Servo 150cc Flip-top Fuel TankAdjustable Threaded Aluminum Shocks Aluminum MufflerHardeded and Coated Steel GearsMulti-piece rollbarSteel High-Temp Brake DiscHeavy Duty Slipper Clutch 3-Shoe Racing ClutchFull Sealed Ball Bearing SetAll Assembled with Radio Control and Ready to Run Over the Competition!

Exceed RC 1/8 Monster Truck MadBeast Nitro Gas RTR .28 Level Engine Black/Red Version $699.95 The new generation of 1/8 Monster trucks are here with much newly added features and functions. The MadBeasts are the pioneering brand of the Nitrorcx Exceed RC 1/8 tectonics. If you thought the 1/8 tectonics were impressive prepare to be astonished by the innovative Mad Beasts. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again.       This massive monster truck comes with Level .28 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 270cc. The impressiveness of the MadBeast can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadBeasts are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you don’t have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadBeast to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadBeasts will lead the way to new standards for the RC world and conquer all. Full Assembled Chassis with Painted body, and complete with Radio system!!  Full ball bearings, all metal transmission gears, metal geared steering servos, this one has it all!!  Pistol Remote Control Radio& Engine 28 Level WheelBase:15" Weight:5.2kg Polished 6061 Aluminum Chassis PlatesMassive pre-glued 6.75" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub 2-Speed Transmission Heavy Duty Metal Gear Steering Servo 270cc Flip-top Fuel Tank Adjustable Threaded Aluminum ShocksAluminum Muffler Hardeded and Coated Steel Gears Multi-piece rollbar Steel High-Temp Brake Disc Heavy Duty Slipper Clutch 3-Shoe Racing ClutchFull Sealed Ball Bearing Set All Assembled with Radio and Ready to Run Over the Competition!  

1/8Th Scale Exceed RC Mad Fire Nitro .21 4WD RC Buggy Buggy Nitro Gas Powered Alpha Blue Version $399.95 The new generation of 1/8 Buggy are here with much newly added features and functions. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again. This massive 1/8 MadFire Buggy comes with Level .21 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 125cc. The impressiveness of the MadFire can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadFire are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you don’t have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadFire to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadFire will lead the way to new standards for the RC world and conquer all. The 4WD Engine-powered Monster Buggy MadFire will Push your Imagination into overdrive! FX-2 Sport Radio& Engine 21 Level WheelBase:15" Weight:5.2kg Polished 6061 Aluminum Chassis Plates Massive pre-glued 4.75" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub 1-Speed Transmission Heavy Duty Metal Gear Steering Servo 125cc Flip-top Fuel Tank Adjustable Threaded Aluminum Shocks      Radio Transmitter: 2 Channel AM 27MHz Aluminum Muffler Powerful .21 Nitro Engine Built-In Innovative Servo Power Saving Concept Aluminum Rear Shocks   Aluminum Rear Plate Full Metal Gear Front CVD Drive Shaft Makes Smooth Turns and Prevent Dust   Aluminum Muffler Hardeded and Coated Steel Gears Multi-piece rollbar Steel High-Temp Brake Disc Heavy Duty Slipper Clutch 3-Shoe Racing Clutch Length: 17.12 Inches Width:  12.20 Inches Height:  7.48  Inches Gear Ratio: 1:10.9 Full Sealed Ball Bearing Set All Assembled with Radio Control and Ready to Run Over the Competition!